Wednesday, January 28, 2009

Maytag Neptune Front Loader Washer Wax Motor Question

Here is another Maytag Neptune question I received today... 

Q: Hi, I have a MAH7500AWQ that the motor stopped working. I need the motor upgrade kit (motor & control board) and as a precaution I wanted to put a fuse in the Wax motor circuit (protect the board) and get a new wax motor for when the one I have dies. What do you suggest? 

 A: Hello, I would suggest that you don't have to worry about the door latch wax motor because your Neptune does not have one... In addition, I don't recommend making any changes to any appliance in the name of safety. If the Engineers felt that the door latch wax motor needed a fuse they would have put one in the circuit. I'm sure that when the Neptune was on the drawing board they did not foresee a design problem with the wax motor. 

The Neptune models affected by the faulty wax motor are the MAH3000, MAH4000, MAH5500A and the 2000 Stackers. If you know anyone with a Neptune front loader please rush them to this blog or the www.neptunehelp.com site so they can replace it before it fails. If your machine won’t spin because the door locked light doesn’t come on and you have one of the affected models listed above then you probably have become a victim of the Maytag Neptune Wax Motor Meltdown. Note: I highly recommend that you don’t keep trying to start your Neptune because you can damage the lower motor control board as well. 

Listen, you have 2 options… 1) Replace the machine control and the wax motor at http://neptunehelp.com/index_files/Page667.htm or, 2) purchase the STAGE 1 repair kit with wax motor and see if your Neptune will come to life. About 45 out of 50 boards work without a problem. 

Occasionally, I get folks whose boards refuse to fill with water which have to be replaced because they suffered more damage… maybe they did not heed my warning about trying to keep starting up machine? 

Look, you would have had to replace the control board anyway… When ordering your control board, it depends on your model and serial number as to which board you need. The simplest replacement is the MAH4000 and the MAH5500A Neptunes as these both use the 22002989 control board. 

The MAH3000 has two different control boards based on the model suffix and 1st two digits of serial number. Here is a breakdown: MAH3000AWW - (10-16) 12001725 or (17 - present) 22002988 MAH3000AWA - (10-16) 12001725 or (17 - present) 22002988 MAH3000AWQ - (10 - present) 22002988 MAH3000AKW - (10 - present) 22002988 MAH3000AAW - (10 - present) 22002917 MAH3000AEW - (10 - present) 22002917 MAH3000AGW - (10 - present) 22002917 MAH3000BGW - (10 - present) 22002917 (50 hertz) Note: I just checked and I don't see any 22002917 control boards in stock... 

 I hope this helps!

Until next time...

Tuesday, January 27, 2009

Maytag Neptune Front Loader Washer Mold Question

Here is another blogosphere question that an unhappy Neptune owner had made recently... Q: I have a maytag neptune front loading washer and there is mold on the front seal. I tried to get it off with bleach etc to no avail. Does Maytag have a replacement part I can get (that works better than the old one). The appliance is only 3 years old.... needless to say between the digital display I had to replace on the dryer and this issue. And the new rattling in the 3 year old dryer.. I am done with Whirlpool/maytag/ and product they build. I have a problem with my whirlpool fridge also...Their products are garbage and I would tell ANYONE to STAY AWAY !!!! A: Yes, you can replace the door boot. The part number is 12002533 and a link to purchase these is on my www.NeptuneWasher.com page.  You may also need the hose which can be found with this link https://ebay.us/xrwXtD via Ebay.

In addition, if you have a MAH3000 you can add a drain hose to the new boot. That way the water in the boot pocket can drain after every wash cycle which should help reduce the mold colony potential. Note: Some earlier MAH4000's also were shipped without the drain hose kit. Below is a picture of the door boot with drain. Below is a picture of a door boot drain hose retrofit. You actually drill out the center of the nipple which allows the water to drain back into the outer tub. As for the quality of some manufactures you listed above... I occasionally do searches on the Internet for other front loaders and I see folks who have problems with other manufacturers, too. Let's face it... Our appliances work very hard and there are a lot of environmental factors that play into how long your machine will last that is really beyond the control of any product manufacturer. 

 I know... The grass is always greener on the other side... but the fact is you own a Maytag Neptune and the good news is that the issues are posted on my blog over time and they are what they are. The three main issues of the earlier Neptunes are the door latch wax motor, moldy door boot and the motor/ motor control board combo reliability. 

 I will now add a forth issue to the list and it is a wear issue and that is the bearings. Unfortunately, Maytag does not have part numbers assigned to the bearings so service technicians are going to leave you a $900 quote to fix your Neptune bearings. They will want to transplant the whole outer tub which runs about $450 by itself! Fight back and replace your bearings yourself with the help of http://www.neptunebearing.com/page4.html. If Shirley in the video can do it... so can you! You can even rent the Neptune Bearing Tool Kit which really reduces the time you are replacing the bearings and there is an awesome step by step video that shows you how to take the Neptune apart, replace bearings and install the seal kit. 

The bearing failure victim in the video is the standalone Neptune but the stacker bearing job is not that much different. Once these four issues are taken care of you will be the proud owner of a happier Neptune front loader! Lastly, don't forget to sign up for the Neptuner list so you will be kept up to date with more Neptune information and other valuable tips as they happen.

Monday, January 26, 2009

MAYTAG NEPTUNE FRONT LOAD WASHER MODEL- MAH4000AWW

Hi Neptuners,

Here is a problem a Neptune owner had in the blogosphere yesterday,

Q: "I have this washer that it would not spin. I put in the Maytag Neptune Washer R11 and Q6 kit and a new wax motor. I got the machine to spin. but I do not think it went up to a full speed.

Now after I put it all back together and went to do a load of laundery the washer will not FILL there is no 120 voltage to eather hot or cold valves. If you turn the timer you can get it to spit water out if the valve. If you put the timer in the normal cycle , the timer will advance with out pushing the start button. Then it will stop when it gets to the first Rinse cycle then it stop. I can get 120 voltage to the bleach water valve.

The door lock light will not come on and it will not spin now. I thought I heard a small pop? So is the upper control board bad and a long with the timer ? please email me back Thanks. "

Here was the response:
A. "The timer should be fine--- it gets the power from the board, that upper machine control board is deffinately bad unfortunately-- you will need to replace it, it runs about 220 dollars.Here is a place you can order the control board from if you like."


Here is my response:

I hope this was not one of my customers that purchased the R11 and Q6 (Stage 1) and did not ask me about the machine's operation after the R11 & Q6 surgery. Yes, a few control boards out of 100 will have to be replaced even after performing the R11 & Q6 replacement because more damaged was done to the control board.

The other thing I would like to mention is that I offer replacement control boards for folks who purchase my Neptune no spin repair kit and the repair does not work for only $159.00! Not $220 as the first answer responded. See http://neptunehelp.com/index_files/Page667.htm to see more Neptune replacement parts.

I guess the moral of the story here is if you purchase my STAGE 1 Maytag Neptune repair kit plus wax motor please contact me if you have any performance issues after performing the R11 and Q6 surgery.


Have a great day!

Wednesday, January 21, 2009

The New Neptunehelp.com Song is really sounding great!

Hi Neptuners,

I wanted to touch base with you and say the Neptune song I am having created is sounding very good. I received a sample of the first verse today and I was really impressed with it and I think you will love it too. As a matter of fact... it keeps playing in my mind!

Once the songs are complete I will post a link to the songs. Songs you ask? I wanted to have two slightly different versions and let you vote on the one that you prefer. The version that wins will be the official song for www.neptunehelp.com. Tell all of your family and friends about the voting and let's see how many votes we can rack up!

Sunday, January 18, 2009

No mail on Monday due to Martin Luther King Jr. Day

Hi Neptuners,

I just wanted to remind you that there will no mail service on Monday, January 19th, due to Martin Luther King Jr. day.

Unfortunately, this will slow down the Maytag Neptune Tony Tool rental program by one day...

I really appreciate the patience being displayed from the folks in the Tony Tool rental queue! I turn these tools as soon as I can and since I have recently added 5 more tools to my rental fleet the queue should get cleared out much quicker. I realize that when your Maytag Neptune starts sounding like a jet taking off you want to replace the bearings before something major fails. If you would like to replace your bearings goto http://www.neptunebearing.com/ and get in the tony tool rental queue. First come, first served...

I have been receiving a tony tool question lately and it is basically this: "Is there someone in my area that can replace my Neptune bearings using the Tony Tool?". So I got to thinking, if you have rented the Tony Tool and would like to help other Neptuners, please let me know. This is a way you can show folks how smart you are by using the Tony Tool and earn some cash, too


Another important Maytag Neptune issue is the 'my maytag neptune won't spin' or 'maytag neptune no spin' See http://www.neptunehelp.com/ for information on the famous no spin issue. Did you know that you could replace the door latch wax motor before it fails and prevent the control board R11 & Q6 failure? A service tech will quote you around $450 to fix this failure that Maytag should fix...

Saturday, January 17, 2009

New Maytag Neptune Song for you Neptuners

Hi Neptuners!

I wanted to get something off of my chest...

I am creating a new novelty song about the Maytag Neptune no spin due to the defective door latch wax motor issue.

Check back often to see if I posted the link to the song.

Actually, I'm planning on creating two songs and you get to vote on which one you like the best.

Two things I know for sure...

1) They will be funny :>)
2) I won't be singing! (I'll stick to performing my other talents)

It has been a long road but it looks like I will finally get my song. I will tell you the story of the hurdles I had to jump through to get this song created after the winning version is determined by your voting.


Jeff

Friday, January 16, 2009

Customer feedback regarding the Maytag Neptune won't spin door latch wax motor failure and the repair

This customer feedback was sent on January 16th, 2009.


"Hello Jeff,

Greetings from Southern California, where the temperature was 85 degrees yesterday.

I received your Stage 1 Repair Kit at 2pm yesterday, and I had clean underwear before dinner.

Many thanks. Bill N."



That's great Bill. Wow, you have 85 degrees? Right now it is -11 degress in Columbus, Ohio @ 10:47 pm! This alberta clipper is really delivering the cold air... When is spring going to get here?