Wednesday, June 26, 2013

Neptune Washer Door Seal Replacement - 12002533 Door Boot

Neptune Washer Door Seal Replacement - 12002533 Door Boot

Here is a video I created for you that demonstrates how to replace your smelly door boot. You can check Amazon with this link http://amzn.to/2z27idE to get more information.


Note: On earlier Neptune front load washers like the MAH3000 (and some of the MAH4000’s) shipped without a drain and drain hose. In the video I explain how you can add a 22004477 (hose) and a 22003074 (shield/guard) to your machine if it did not arrive with a drain. 

Here are the links so you can check availability:

Shield: http://jeffhartman.appliancepartsupply.com/inquiry.php?id=WP22003074

Hose: http://jeffhartman.appliancepartsupply.com/inquiry.php?id=WP22004477





Let me know if you have any questions about changing your Maytag Neptune Door Boot.

You can also replace your Neptune bearings and seal when they start to fail and sound like a jet taking off during the spin cycle. See Neptune Bearing for more details about the bearing and 12002022 seal kit as well as the renting Neptune Bearing Tool Kit to save time and effort.



Until next time...

Sunday, June 9, 2013

Maytag Neptune Bearing - How To Install The White Plastic Spacer Clip - Earlier Lip Seal

Maytag Neptune Bearing - How To Install The White Plastic Spacer Clip - Earlier Lip Seal

When changing your Maytag Neptune Bearings and your machine has the earlier lip seal you will have to install the white plastic spacer clip correctly. Below is a video that shows you the correct orientation. The best thing to do is note the orientation before removing the clip. A client has suggested that you mark the front side of clip with Sharpie or equiv. Thank for that tip!


I hope you found this video helpful! Note: here is a link to my Youtube channel in case video is not working...

Remember... you can order all of your appliance parts (except Neptune bearings) at  www.washerbearings.com/parts and have your model number handy so you can quickly look up your parts. They stock replacement parts for your fridge, range, dish washer and your clothes washer and dryer. When repairing your appliances don't forget to unplug your machine before making any repairs!

Until next time...

Jeff 

Sunday, June 2, 2013

Ange's Pizza has a new location in Clintonville area, Ohio

Ange's Pizza has a new location in Clintonville area, Ohio



You probably know that I love Ange's Pizza in the Columbus, Ohio area and they just opened up a new shop in Clintonville, Ohio. I had some friends and my kids with me so I just had to stop in and say hi! See Anges Pizza for website.



Here is my Medium Veggy exiting the oven... Yummy


There are now 7 Anges Pizza's in the Columbus, Ohio area!


Karl Rd            5767 Karl Road                614-888-5767

Gahanna          1018 N. Hamilton Road     614-855-9500

Hilliard             2149 Hilliard-Rome Road   614-777-9680

Powell              8747 Smokey Row Road   614-659-0988

Clintonville        4511 N. High Street         614-659-0988

Whitehall          139 S Yearling Road         614-235-0898

Noe-Bixby         2980 Noe-Bixby Road       614-864-0468

When you're in the Columbus, Ohio area and would like to taste some great pizza... Stop by one of the locations and let me know when you plan to and maybe we could meet up...  Note: The Whitehall location was the first on the scene back in the 1950's!

Again, see Anges Pizza for website.




Until next time...














Thursday, May 2, 2013

FAV6800 bearing and seal kit – washer parts

FAV6800 bearing and seal kit – washer parts
We now have available for your top loading Maytag washer the FAV6800 bearing and seal kit. There are two kits based on the first two digits of your serial number. You will need Kit 1 if your FAV6800 serial number starts with a 10 or 11. Kit 2 is for FAV6800 machines where the serial number starts with 12 and up.

In the past, you had to replace the inner basket and washer tub when the FAV6800 bearings fail or simply scrap the machine. Why scrap the machine when you can economically repair it and get additional years out of it? No special tools are required if you have a large crescent wrench. In most cases the tub seal will start leaking and that ultimately leads to the bearing failure.

Both bearing and seal kits include (2) bearings. Kit 1 includes the special one way bearing that should only let the inner basket rotate CCW by hand. See FAV6800 Bearing for more information.

www.neptunehelp.com has been offering Maytag washer repair parts for over 7 years now starting with the infamous 12002535 door latch wax motor failure on the Maytag Neptune front load washers. The Q6 and R11 repair kit we created allowed homeowners to repair their machine control board by soldering two components onto the machine control board thus saving a ton on repair bills.

After clients Maytag Neptune's started to sound like airplanes we created the Maytag Neptune Bearing and 12002022 Seal Kit. Then Whirlpool Duet and Kenmore Elite front load washer owners came to us and we created kits for their washing machines, too. Next we decided to create a new site called www.washerbearings.com as a starting point for all of the machines.

Keep in mind that if you need any appliance parts (not bearing and seal kits) you can visit www.washerbearings.com/parts to order replacement parts. Have your model number available when you visit.


Until next time...

 

Jeff

Saturday, March 16, 2013

Brody Stevens and Little Esther hangin with the Neptune Man

Here is a recent photo of me with Little Esther, Tonia, Brody Stevens. I bought a Groupon for a local show in the Columbus, Ohio area and it included a photo op. I thought... What the heck… Let’s get my photo taken with a couple of well known comedians. I will tell you more about Tonia later. She is creating a helpful website that will come in very handy for a lot of people.




Speaking of websites… If you have a washing machine… I offer special bearing and seal kits for when they start to get loud which usually indicates a tub bearing failure. I even rent a cool tool for the Maytag Neptune front load washers to help you save time and effort when replacing Neptune tub bearings. You can visit my main site at www.washerbearings.com which branches out to the different models.

Since I specialize in the tub bearing and seal kits you order the bearing and seal kits only from my sites and you can order other appliance parts by visiting www.washerbearings.com/parts to order replacement parts. Just have your model and serial numbers handy to help them look you your replacement parts.

I'm now officially called the "Neptune Man" and here is my song Vicky made for me http://neptunewasher.blogspot.com/2012/11/hey-neptune-man-song.html


Until next time…



Jeff

Monday, February 11, 2013

Maytag Neptune Bearing Replacement - What not to do when taking your Neptune apart

Maytag Neptune Bearing Replacement - What not to do when taking your Neptune apart

I created this video for all of my Neptune Bearing clients as a tip to save you time and frustration and it has to do with the tub cover after you remove it from your machine.


For more information about how to replace bearings on your washing machine see Washer Bearings.

Don't forget to subscribe to my Youtube channel!


Until next time...

Friday, February 1, 2013

Donna the Deer Lady Solution - Move Deer Crossing Signs

Here is the Donna the deer lady clip...






Now, here is a followup to Donna the deer lady story...


Watch out for the deer until the hoofestrian bridges are built!

When your washer starts getting loud visit Washer Bearings for help!


Until next time...