Another Washer You Do Not Want To Buy - WFW87HEDW0

www.washerbearings.com - I get this question all the time. I decided to turn it around so I can tell you which washers I recommend you don’t buy based on my experiences and save you some frustration and money...

Whether you’re shopping for a new or pre-owned washer online or picking one up off the curb you need to know which models you can easily replace the bearings and seal. Otherwise, it will be too expensive to repair. Visit the site above to see all of the models that we offer bearing and seal kits for and you will be good.

Today, we are looking at a Whirlpool WFW87HEDW0 front load washer that when the bearings fail you will not be able to cost effectively replace the bearings and seal because the two tub halves are glued together. For that reason I recommend that you don't buy them.

Check out the video and be on the lookout for more washers that you should avoid.

Have you been bitten by a bearing failure in the WFW87HEDW0 front load washer? Let me know in the comments.

So far the models to avoid are:

WFW72HEDW0
WFW87HEDW0

I will add to the list as I discover their model numbers...


Thank you,

Jeff Hartman
“The Neptune Man”

Which washer and dryer should I buy - Here's one you don't want to buy

www.washerbearings.com - I get this question all the time. I decided to turn it around so I can tell you which washers I recommend you don’t buy based on my experiences and save you some frustration and money...

Whether you’re shopping for a pre-owned washer online or picking one up off the curb you need to know which models you can easily replace the bearings and seal. Otherwise, it will be too expensive to repair. Visit the site above to see all of the models that we offer bearing and seal kits for and you will be good.

Today, we are looking at a Whirlpool WFW72HEDW0 front load washer where the bearings failed after three short years of use. David, a technician in Florida called me and said that he could not replace the bearings and seal because the tub halves were glued together and you have to purchase the whole tub assembly for around $700!

Checkout the video and watch for more washers that you should avoid.

Have you been bitten by a bearing failure in the WFW72HEDW0 front load washer? Let me know in the comments.


Thank you,

Jeff Hartman
“The Neptune Man”


P.S. If you're washer is giving you the F35 / SUD Error code visit my www.F35Error.com page for help!

Tony Tool Review - Maytag Neptune Bearing Replacement Tool

www.neptunekits.com - Whether you're an appliance technician, laundromat owner or handyman wanting to help people make their washers last longer you should invest in a Tony Tool kit which was naturally designed for the Maytag Neptune front load washers with the solid door panel (no window).

You know that having the right tool for the job is paramount when performing the more difficult tasks so why would you attempt replacing Neptune bearings without a tool?

I've used the Tony Tools since 2009 and can attest to how durable these tools are!

In addition, you can order bulk Neptune bearings and bulk Neptune bearing and 12002022 seal kits at a discount and save even more by visiting the www.neptunekits.com page.

Let me know if you've used a Tony Tool in the comments below and don't forget to subscribe!


Jeff Hartman
"The Neptune Man"

Maytag Neptune No Spin Issue Video - What to do

Hi Neptuner,

I just finished up a new video for explaining what to do when your Maytag Neptune Front load washer will not lock the door and spin the clothes and the R11 resistor on the machine control board is burnt...

Until next time...

Jeff Hartman
"The Neptune Man"

www.washerbearings.com

Neptune Bearing Tool Kit Upgrade - We are Jamming!

www.neptunebearing.com – Due to Neptuner feedback a jam nut will be included with each Neptune bearing tool kit in case the round nut threads itself off the threaded rod. This will lock the round nut to the shaft. In most cases the Neptune bearing tool works flawlessly but we have had a recent issue so we are nipping it in the bud.

As always, I welcome feedback so I can keep improving the Neptune bearing replacement process.

Thank you,

Jeff Hartman

“The Neptune Man”

P.S. If your washer is giving you the F35 SUD error then visit my www.F35Error.com page for a solution!

Top Thrill Dragster Ride Pushes How Much Horsepower?

Here is a physics Question for you... How much horse power does it take to accelerate a 7 ton train from zero to 120 mph in less than 4 seconds?

I recently visited Cedar Point in Sandusky Ohio and rode the Top Thrill Dragster and what a rush it provides!

If your washing machine sounds like the Top Thrill Dragster taking off then it is time to replace your bearings! Visit my www.washerbearings.com for answers.

Thank you and enjoy!


Jeff Hartman
"The Neptune Man"

Dryer F01 Error Fix - Repair Kit

This video will help you if your dryer is experiencing the F01 Error code. I created the www.F35Error.com repair kit so I naturally created the www.F01Error.com kit for you. I start with a history of repair kits I've created to save homeowners a ton of money. Skip to 5:15 for the F01 Error kit intro...

Let me know if this video helped you in the comments below!

Thank you,

Jeff Hartman
"The Neptune Man"


P.S. Visit my www.washerbearings.com site if your washer is sounding like a jet taking off to discover how to replace your bearings and save a bundle.