Friday, October 6, 2017

Whirlpool Dryer F01 Error code - Repair Kit Feedback




Have you repaired your Whirlpool built dryer with the www.F01Error.com kit? Remember Whirlpool manufactures a number of different brands such as Kenmore Elite and Maytag dryers.

Please leave a comment on your dryer F01 repair experience and let me know the following:

1. If you first tried soldering the melted relay terminal and if so, how long did it last before you experienced the F01 error code again.
2. How long did it take to perform the repair.
3. Did you receive a quote on what the repair would have cost.
4. Send me a photo of you working on your F01 repair.


Thank you,

Jeff Hartman
"The Neptune Man"




P.S. Visit my other money saving sites such as www.F35Error.com and www.washerbearings.com for when your washer sounds like a jet plane taking off in the spin cycle.

Monday, October 2, 2017

Blooper Reel of SpaceX' Booster Landings before they landed it



Here is a blooper reel that SpaceX released of some failures when attempting to land the Falcon 9 booster. The idea that reusing the boosters will reduce the cost of future launch missions. It's a good thing it did not take as many landing attempts as Thomas Edison did when inventing the light bulb!

I have not failed. I've just found 10,000 ways that won't work... - Thomas Edison


Jeff Hartman
"The Neptune Man"


P.S. If your washer sounds like a rocket booster landing when in the high speed spin cycle then visit www.washerbearings.com for help!

Sunday, October 1, 2017

WFW94HEAW2 – Another Whirlpool Washer Not To Buy



I get this question all the time. I decided to turn it around so I can tell you which washers I recommend you don’t buy based on my experiences and save you some frustration and money... 

Whether you’re shopping for a new or pre-owned washer online or picking one up off the curb you need to know which models you can easily replace the bearings and seal. Otherwise, it will be too expensive to repair. Visit the site above to see all of the models that we offer bearing and seal kits for and you will be good.

Today, we are looking at a Whirlpool WFW94HEAW2 front load washer that when the bearings fail you will not be able to cost effectively replace the bearings and seal because the two tub halves are glued together. For that reason I recommend that you don't buy them.  Note: The WFW94HEAC2, WFW94HEAC0 and WFW94HEAW0 is the same washer except for the color, etc.

Have you been bitten by a bearing failure in the WFW94HEAW2 front load washer? Let me know in the comments.

So far the Whirlpool washer models to avoid are:

WFW70HEBW0
WFW72HEDW0
WFW87HEDW0
WFW95HEXW2
WFW94HEAW0
WFW94HEAW2
WFW94HEAC0
WFW94HEAC2


Maytag washers to avoid are:

MHW3505FW0



I will add to the list as I discover more model numbers you don't want to own due to the fact you cannot change your bearings economically...


Thank you,

Jeff Hartman
“The Neptune Man”

Tuesday, September 19, 2017

Warning - Washer Dryer Hose Y Adapter Can Flood Your House


www.washerbearings.com - Watch this important video to protect your house from flooding.

Leave comment if you have experienced this failure or know someone who has...

Thank you,

.

Jeff Hartman
"The Neptune Man"


P.S. If you're washer is giving you the F35 / SUD Error code visit my www.F35Error.com page for help!

Friday, September 15, 2017

Maytag MHW3505FW0 - Which Maytag Washer Not To Buy





www.washerbearings.com - I get this question all the time. I decided to turn it around so I can tell you which washers I recommend you don’t buy based on my experiences and save you some frustration and money...

Whether you’re shopping for a new or pre-owned washer online or picking one up off the curb you need to know which models you can easily replace the bearings and seal. Otherwise, it will be too expensive to repair. Visit the site above to see all of the models that we offer bearing and seal kits for and you will be good.

Today, we are looking at a Maytag MHW3505FW0 front load washer that when the bearings fail you will not be able to cost effectively replace the bearings and seal because the two tub halves are glued together. For that reason I recommend that you don't buy them.

Check out the video and watch for more washers that you should avoid.

Have you been bitten by a bearing failure in the WFW70HEBW0 front load washer? Let me know in the comments.

So far the Whirlpool washer models to avoid are:

WFW70HEBW0
WFW72HEDW0
WFW87HEDW0
WFW95HEXW2

Maytag washers to avoid are:

MHW3505FW0



I will add to the list as I discover more model numbers you don't want to own due to the fact you cannot change your bearings economically...


Thank you,

Jeff Hartman
“The Neptune Man”

P.S. If you're washer is giving you the F35 / SUD Error code visit my www.F35Error.com page for help!

Thursday, September 14, 2017

Another Washer You Do Not Want To Buy - WFW70HEBW0



www.washerbearings.com - I get this question all the time. I decided to turn it around so I can tell you which washers I recommend you don’t buy based on my experiences and save you some frustration and money...

Whether you’re shopping for a new or pre-owned washer online or picking one up off the curb you need to know which models you can easily replace the bearings and seal. Otherwise, it will be too expensive to repair. Visit the site above to see all of the models that we offer bearing and seal kits for and you will be good.

Today, we are looking at a Whirlpool WFW70HEBW0 front load washer that when the bearings fail you will not be able to cost effectively replace the bearings and seal because the two tub halves are glued together. For that reason I recommend that you don't buy them.

Watch the video and subscribe for more washers that you should avoid.

Have you been bitten by a bearing failure in the WFW70HEBW0 front load washer? Let me know in the comments.

So far the Whirlpool washer models to avoid are:

WFW70HEBW0
WFW72HEDW0
WFW87HEDW0
WFW95HEXW2

I will add to the list as I discover new model numbers you don't want to own due to the fact you cannot change your bearings economically...


Thank you,

Jeff Hartman
“The Neptune Man”

P.S. If you're washer is giving you the F35 / SUD Error code visit my www.F35Error.com page for help!

Tuesday, September 12, 2017

Another Washer You Do Not Want To Buy - WFW87HEDW0



www.washerbearings.com - I get this question all the time. I decided to turn it around so I can tell you which washers I recommend you don’t buy based on my experiences and save you some frustration and money...

Whether you’re shopping for a new or pre-owned washer online or picking one up off the curb you need to know which models you can easily replace the bearings and seal. Otherwise, it will be too expensive to repair. Visit the site above to see all of the models that we offer bearing and seal kits for and you will be good.

Today, we are looking at a Whirlpool WFW87HEDW0 front load washer that when the bearings fail you will not be able to cost effectively replace the bearings and seal because the two tub halves are glued together. For that reason I recommend that you don't buy them.

Check out the video and be on the lookout for more washers that you should avoid.

Have you been bitten by a bearing failure in the WFW87HEDW0 front load washer? Let me know in the comments.

So far the models to avoid are:

WFW72HEDW0
WFW87HEDW0

I will add to the list as I discover their model numbers...


Thank you,

Jeff Hartman
“The Neptune Man”

Which washer and dryer should I buy - Here's one you don't want to buy



www.washerbearings.com - I get this question all the time. I decided to turn it around so I can tell you which washers I recommend you don’t buy based on my experiences and save you some frustration and money...

Whether you’re shopping for a pre-owned washer online or picking one up off the curb you need to know which models you can easily replace the bearings and seal. Otherwise, it will be too expensive to repair. Visit the site above to see all of the models that we offer bearing and seal kits for and you will be good.

Today, we are looking at a Whirlpool WFW72HEDW0 front load washer where the bearings failed after three short years of use. David, a technician in Florida called me and said that he could not replace the bearings and seal because the tub halves were glued together and you have to purchase the whole tub assembly for around $700!

Checkout the video and watch for more washers that you should avoid.

Have you been bitten by a bearing failure in the WFW72HEDW0 front load washer? Let me know in the comments.


Thank you,

Jeff Hartman
“The Neptune Man”


P.S. If you're washer is giving you the F35 / SUD Error code visit my www.F35Error.com page for help!

Monday, September 11, 2017

Tony Tool Review - Maytag Neptune Bearing Replacement Tool




www.neptunekits.com - Whether you're an appliance technician, laundromat owner or handyman wanting to help people make their washers last longer you should invest in a Tony Tool kit which was naturally designed for the Maytag Neptune front load washers with the solid door panel (no window).

You know that having the right tool for the job is paramount when performing the more difficult tasks so why would you attempt replacing Neptune bearings without a tool?

I've used the Tony Tools since 2009 and can attest to how durable these tools are!

In addition, you can order bulk Neptune bearings and bulk Neptune bearing and 12002022 seal kits at a discount and save even more by visiting the www.neptunekits.com page.

Let me know if you've used a Tony Tool in the comments below and don't forget to subscribe!


Jeff Hartman
"The Neptune Man"

Saturday, September 9, 2017

Maytag Neptune No Spin Issue Video - What to do

Hi Neptuner,

I just finished up a new video for explaining what to do when your Maytag Neptune Front load washer will not lock the door and spin the clothes and the R11 resistor on the machine control board is burnt...

Until next time...

Jeff Hartman
"The Neptune Man"

www.washerbearings.com



Neptune Bearing Tool Kit Upgrade - We are Jamming!



www.neptunebearing.com – Due to Neptuner feedback a jam nut will be included with each Neptune bearing tool kit in case the round nut threads itself off the threaded rod. This will lock the round nut to the shaft. In most cases the Neptune bearing tool works flawlessly but we have had a recent issue so we are nipping it in the bud.

As always, I welcome feedback so I can keep improving the Neptune bearing replacement process.

Thank you,

Jeff Hartman

“The Neptune Man”

P.S. If your washer is giving you the F35 SUD error then visit my www.F35Error.com page for a solution!

Monday, September 4, 2017

Top Thrill Dragster Ride Pushes How Much Horsepower?



Here is a physics Question for you... How much horse power does it take to accelerate a 7 ton train from zero to 120 mph in less than 4 seconds?

I recently visited Cedar Point in Sandusky Ohio and rode the Top Thrill Dragster and what a rush it provides!

If your washing machine sounds like the Top Thrill Dragster taking off then it is time to replace your bearings! Visit my www.washerbearings.com for answers.

Thank you and enjoy!


Jeff Hartman
"The Neptune Man"

Sunday, April 2, 2017

Dryer F01 Error Fix - Repair Kit

This video will help you if your dryer is experiencing the F01 Error code. I created the www.F35Error.com repair kit so I naturally created the www.F01Error.com kit for you. I start with a history of repair kits I've created to save homeowners a ton of money. Skip to 5:15 for the F01 Error kit intro...




Let me know if this video helped you in the comments below!

Thank you,

Jeff Hartman
"The Neptune Man"


P.S. Visit my www.washerbearings.com site if your washer is sounding like a jet taking off to discover how to replace your bearings and save a bundle.