Maytag Neptune Bearing Tool Rental Special for November 2018

Here's November's (2018) special when you rent the Neptune bearing tool kit which includes bearings, OEM 12002022 seal kit, bearing spacer, emery cloth, snap ring pliers, 2" wire wheel and step by step DVD.


Click HERE for more information and to order!


Thank you,



Jeff Hartman
"The Neptune Man"


Check out my other money saving sites www.F35Error.com and www.F01Error.com for Whirlpool washer and dryers. Fix it yourself and save!

MGDE300VW1 Dryer F01 Error Code Repair kit

Hello,

A client sent an email asking about their Maytag MGDE300VW1 dryer that is displaying the F01 Error code. He wanted to know if the www.F01Error.com repair kit would help.

After years of operation the relay on the control board starts to wear out and it will get to the point where the relay contacts will get so worn the dryer will have trouble starting and will set the F01 error code. It is time to replace the relay which is what mostly causes the F01 error and it is in the kit. Don't replace your expensive control board... Simply replace the relay instead!

When I looked up his MGDE300VW1 dryer parts list it turns out that he has the W10174745 control board (# 52). So the answer is... Yes!  The F01 Error kit will help him.


Thank you,

Jeff Hartman
"The Neptune Man"


P.S. Visit my www.washerbearings.com if your washer sounds like a jet taking off.

P.S.S. Is your washer getting the F35 error code? Visit my www.F35Error.com for help!

Whirlpool Washer F35 Error code - Repair Kit Feedback

Have you repaired your Whirlpool built washer with the www.F35Error.com kit? Remember, Whirlpool manufactures a number of different brands such as Whirlpool Duets, Kenmore Elites and Maytag washers.

Please leave a comment on your washer F35 repair experience and let me know the following:

1. If you first tried replacing your APS (analog pressure sensor) and if so, how long did it last before you experienced the F35 error code again?
2. Did you perform the F35 Error kit or the APS repair kit, or both?
3. How long did it take to perform the repair?
4. Did you receive a quote on what the repair would have cost?


Thank you,

Jeff Hartman
"The Neptune Man"




P.S. Visit my other money saving sites such as www.F01Error.com and www.washerbearings.com for when your washer sounds like a jet plane taking off in the spin cycle.

Neptune Bearing Tool Kit Upgrade - We are Jamming!

www.neptunebearing.com – Due to Neptuner feedback a jam nut will be included with each Neptune bearing tool kit in case the round nut threads itself off the threaded rod. This will lock the round nut to the shaft. In most cases the Neptune bearing tool works flawlessly but we have had a recent issue so we are nipping it in the bud.

As always, I welcome feedback so I can keep improving the Neptune bearing replacement process.

Thank you,

Jeff Hartman

“The Neptune Man”

P.S. If your washer is giving you the F35 SUD error then visit my www.F35Error.com page for a solution!

F35 Error Code Kenmore Elite HE3T - Repair kit and advice

Wow! It finally happened… I started getting F35 errors and the SUD error on my Kenmore Elite HE3T Steam front load washer.

It started when I booted my Kenmore 70 series top loader washer and dryerfor the Kenmore Elite HE3T front load washer and dryer back on November 16, 2008. It is now July, 2015.

Here is the post on the new replacement HE3T front load washer and dryerback on November 30, 2008 that shows the brand new Kenmore Elite washer and dryer. Note: I had to stack them

The HE3T steam washer has been dutifully washing my clothes until now… The washer has been shutting down for the F35 and sud error. Every time I successfully got it to start a load I wondered if it was my last load.

The last load finally came last Thursday. No more resetting the machine by unplugging it, kicking it did not work either ;) .

I discovered a solution and I created a low cost F35 error kit to show you how to repair your Whirlpool Duet/Kenmore Elite/Maytag Epic washer if you have the F35 and sud code happening. This kit will work 99% of the time and save you an expensive service call because you can do yourself and save. If you call a service man he will replace your pressure sensor or the CCU control unit. Try the low cost kit first and see if it works for you!

This is not my first repair kit for washers by the way… I created the STAGE 1 kit for the Maytag Neptune front loaders back in 2006 and helped Neptune owners save over a million dollars in service calls by repairing their Neptune door latch wax motor issue. Later my clients started asking me why their Neptune sounds like a jet plane taking off when it enters the spin cycles. I created the Neptune bearing and 12002022 seal kit and offer a special tool kit for replacing the tub bearings and seal saving Neptune owners about $700 on that repair!

If you have suffered the F35 and SUD error leave your comments below on how you corrected the error.

Jeff Hartman

“The Neptune Man”