Maytag Neptune Bearing Tool Rental FAQ
1. Why is the Tony Tool Rental deposit so much?
1A: I have to request the large deposit since the Tony Tool costs $425 to purchase otherwise I may not get the tool kits back.
2. Does the Tony Tool Rental kit include the bearings and 12002022 seal kit?
2A: Yes, the bearings and 12002022 seal kit are included as well as a Neptune bearing spacer in case yours is cracked.
3. Will the Tony Tool work on my 2000 Stacker model?
3A: Yes, although the DVD will show the standalone Neptune disassembly process... I include a link so you can download the Stacker service manual and it will show you how to disassemble the Stacker. Once inside, they are the same parts where the bearings are concerned. The Neptune bearing and 12002022 seal kit (along with Tony Tool ) work on all solid door panel Neptune front loaders.
4. How long will it take to replace the bearings?
4A: I’ve personally used the Tony Tool and the first bearing job was on a MAH4000 and it took me about 3.5 hours but I was video taping the process. The 2nd bearing replacement was on an MAH5500BWW and it took me 1.5 hours from start to testing machine. One variable is the front bearing and how much rust is in there and that is why it is best to catch the bearing failure as early as possible.
5. Should I replace my door latch wax motor and belt?
5A: If you have a timer knob (non digital) Neptune and it has the original wax motor with brownish color actuator tip I would highly recommend you replace it before it fails. See Neptune Help Song. If you order it and find out you already have the newer black tipped wax motor then just send it back for a refund with the tool. Same with the belt. If you order it and find out your belt is still useable just send it back unopened for a refund.
6. Can I use the revised lip seal if my machine had the earlier lip seal installed?
6A: Not directly. The spinner support shafts are machined differently. If you really want the newer revised lip seal then you would have to order the new spinner support which includes the new revised lip seal then you can send back the 12002022 seal kit for a $40 refund to help offset the new spinner support purchase.
For more information on saving time and effort when replacing your Maytag Neptune bearings see Neptune Bearing.
Until next time...
Showing posts with label spinner support. Show all posts
Showing posts with label spinner support. Show all posts
Saturday, June 30, 2012
Sunday, June 10, 2012
Maytag Neptune Front Loader tub bearing replacement tip
Maytag Neptune Front Loader tub bearing replacement tip
If your Maytag Neptune front loader is at least 10 years old I am highly recommending that you replace your tub bearings and seal proactively and let me explain why.
Eliminate the #1 Tony Tool challenge which is getting the rusted front bearing out…
As you know… I rent the specially designed Tony Tool to Neptune owners to assist them when changing their bearings and seal and I will tell you the number one challenge when changing the bearings is getting the front bearing out. In the past, Neptuner’s only replaced their bearings after the machine sounds like a jet taking off because the seal has leaked water into the bearings. What happens next is that rust forms between the front bearing outer race and the aluminum bearing housing making the front bearing difficult to extract. If you replace the bearings before they rust… the front bearing will come much easier with less stress to the machine. The tool kit rental comes with a pair of snap ring pliers, 2" wire wheel, extra bearing spacer and emery cloth as well as the bearings and 12002022 seal kit. A DVD is included that shows you how to disassemble your Neptune, swap bearings and install the seal kit. You can order the tool kit rental at Neptune Bearing. Go down about half way and click where is says " Click HERE to read the tool rental agreement & order. Once the tool rental agreement opens up then there will be an Add to Cart button on the left side. Click on the Add to Cart button and you will be taken into PayPal's secure server to complete the payment.
Prevent spinner support (shaft) damage…
In some Neptune bearing failure cases the spinner support shaft was damaged because a bearing hung up and that caused a groove in the shaft so it had to be replaced at $89.00. The upfront cost for a new spinner support is $129 delivered via UPS Ground but I allow you to send the 12002022 seal kit back with the tool kit rental for an additional $40 refund because the spinner support arrives with a revised lip seal so you won’t need the 12002022 seal kit I sent you with the tool kit. The $40 seal kit refund takes the $129 down to $89. See Spinner Support to order a new spinner support.
The tool rental queue is lower than usual so you will get it quicker…
I will admit that the Neptune bearing tool kit rental queue is low right now which means that you will get a tool kit quicker than usual and that is a good thing. In the past I would have anywhere from 8 to 15 people in the queue with all of the tool kits out in the field. However, it is less critical in your case because your machine is not down and you are being proactive.
You can control washer downtime by replacing your bearings proactively…
Another benefit being proactive is that you control the washer downtime. You can do all of the laundry before you start the disassembly so there is less pressure to complete the bearing swap out. If your bearings fail and there are a large number of Neptuner’s in the queue that will delay you receiving the tool kit and then that would mean visits to the Laundromat or relative’s houses to do your laundry.
Take the time to really clean your Neptune while you have it apart…
Does your Neptune smell funky? I get lots of feedback from Neptuner’s and they tell me that they took extra time to really clean out their Neptune while they had it apart to freshen it up. There are simply areas that you cannot get to and properly clean until you disassemble the machine. From there, you can start a regimen of using the Affresh tablets or other front load cleaning product to help prevent the buildup of smelly gunk and keep your machine smelling better. You may also consider replacing the door boot while you change your bearings and seal. You can order one for $49.00 when your rent the tool kit.
Other parts you may want to replace while your Neptune is disassembled…
To wrap it up... Don’t forget that you can also get the new Neptune belt for $26.00 and the new door boot for $49.00 from the Neptune Bearing order form. If you take machine apart and decide your belt still looks good then just send it back with the tool kit unopened for a $26 refund. If you have a timer knob then you will want to make sure that you replace your door latch wax motor before it fails. Order extra wax motors for only $12 when you rent the tool kit!
Top 5 reasons to proactively change your Neptune front loader bearings.
1. #1 tool kit rental challenge is eliminated as the front bearing will come right out
2. Prevent potential damage to the spinner support
3. The Neptune bearing rental queue is very low right now
4. Totally prevent unexpected downtime and Laundromat visits
5. Funky Smelling Neptune’s can be really cleaned out when they are disassembled
Again, here is that link to order the Neptune bearing tool kit rental... Neptune Bearing.
Until next time...
If your Maytag Neptune front loader is at least 10 years old I am highly recommending that you replace your tub bearings and seal proactively and let me explain why.
Eliminate the #1 Tony Tool challenge which is getting the rusted front bearing out…
As you know… I rent the specially designed Tony Tool to Neptune owners to assist them when changing their bearings and seal and I will tell you the number one challenge when changing the bearings is getting the front bearing out. In the past, Neptuner’s only replaced their bearings after the machine sounds like a jet taking off because the seal has leaked water into the bearings. What happens next is that rust forms between the front bearing outer race and the aluminum bearing housing making the front bearing difficult to extract. If you replace the bearings before they rust… the front bearing will come much easier with less stress to the machine. The tool kit rental comes with a pair of snap ring pliers, 2" wire wheel, extra bearing spacer and emery cloth as well as the bearings and 12002022 seal kit. A DVD is included that shows you how to disassemble your Neptune, swap bearings and install the seal kit. You can order the tool kit rental at Neptune Bearing. Go down about half way and click where is says " Click HERE to read the tool rental agreement & order. Once the tool rental agreement opens up then there will be an Add to Cart button on the left side. Click on the Add to Cart button and you will be taken into PayPal's secure server to complete the payment.
Prevent spinner support (shaft) damage…
In some Neptune bearing failure cases the spinner support shaft was damaged because a bearing hung up and that caused a groove in the shaft so it had to be replaced at $89.00. The upfront cost for a new spinner support is $129 delivered via UPS Ground but I allow you to send the 12002022 seal kit back with the tool kit rental for an additional $40 refund because the spinner support arrives with a revised lip seal so you won’t need the 12002022 seal kit I sent you with the tool kit. The $40 seal kit refund takes the $129 down to $89. See Spinner Support to order a new spinner support.
The tool rental queue is lower than usual so you will get it quicker…
I will admit that the Neptune bearing tool kit rental queue is low right now which means that you will get a tool kit quicker than usual and that is a good thing. In the past I would have anywhere from 8 to 15 people in the queue with all of the tool kits out in the field. However, it is less critical in your case because your machine is not down and you are being proactive.
You can control washer downtime by replacing your bearings proactively…
Another benefit being proactive is that you control the washer downtime. You can do all of the laundry before you start the disassembly so there is less pressure to complete the bearing swap out. If your bearings fail and there are a large number of Neptuner’s in the queue that will delay you receiving the tool kit and then that would mean visits to the Laundromat or relative’s houses to do your laundry.
Take the time to really clean your Neptune while you have it apart…
Does your Neptune smell funky? I get lots of feedback from Neptuner’s and they tell me that they took extra time to really clean out their Neptune while they had it apart to freshen it up. There are simply areas that you cannot get to and properly clean until you disassemble the machine. From there, you can start a regimen of using the Affresh tablets or other front load cleaning product to help prevent the buildup of smelly gunk and keep your machine smelling better. You may also consider replacing the door boot while you change your bearings and seal. You can order one for $49.00 when your rent the tool kit.
Other parts you may want to replace while your Neptune is disassembled…
To wrap it up... Don’t forget that you can also get the new Neptune belt for $26.00 and the new door boot for $49.00 from the Neptune Bearing order form. If you take machine apart and decide your belt still looks good then just send it back with the tool kit unopened for a $26 refund. If you have a timer knob then you will want to make sure that you replace your door latch wax motor before it fails. Order extra wax motors for only $12 when you rent the tool kit!
Top 5 reasons to proactively change your Neptune front loader bearings.
1. #1 tool kit rental challenge is eliminated as the front bearing will come right out
2. Prevent potential damage to the spinner support
3. The Neptune bearing rental queue is very low right now
4. Totally prevent unexpected downtime and Laundromat visits
5. Funky Smelling Neptune’s can be really cleaned out when they are disassembled
Again, here is that link to order the Neptune bearing tool kit rental... Neptune Bearing.
Until next time...
Sunday, October 30, 2011
Neptune Bearings - airplane or jet sound while spinning
Neptune Bearings - airplane or jet sound while spinning
Ok, you thought you bought a Maytag Neptune front load washer... but now it has morphed into an airplane!
Below is a nice video to show you what to listen for so you can repair your Neptune and get another 5 - 10 years out of it.
See www.neptunebearing.com for the replacement bearings and you can rent a special tool kit that will save you time and effort plus comes with a instructional DVD for the home owner!
If you bother ol' Lonely be prepared to receive a $900 quote to replace the large outer tub plus labor, etc. Why replace the $500 outer tub when you can replace the bearings?
If you catch the bearing failure early then you don't have to replace spinner support but just in case, you can order the Spinner Support. Keep in mind that the spinner support comes with a seal kit so you can return the 12002022 seal kit for a $40 refund which almost cuts the spinner support cost in half when you purchase kit at Neptune Bearing!
One last thing... Other front loaders have the same morphing issue, too! If you're the proud owner of a:
Ok, you thought you bought a Maytag Neptune front load washer... but now it has morphed into an airplane!
Below is a nice video to show you what to listen for so you can repair your Neptune and get another 5 - 10 years out of it.
See www.neptunebearing.com for the replacement bearings and you can rent a special tool kit that will save you time and effort plus comes with a instructional DVD for the home owner!
If you bother ol' Lonely be prepared to receive a $900 quote to replace the large outer tub plus labor, etc. Why replace the $500 outer tub when you can replace the bearings?
If you catch the bearing failure early then you don't have to replace spinner support but just in case, you can order the Spinner Support. Keep in mind that the spinner support comes with a seal kit so you can return the 12002022 seal kit for a $40 refund which almost cuts the spinner support cost in half when you purchase kit at Neptune Bearing!
One last thing... Other front loaders have the same morphing issue, too! If you're the proud owner of a:
- Whirlpool Duet, see www.duetbearing.com
- Whirlpool Duet Sport, see www.duetbearing.com
- Kenmore Elite, See www.elitebearing.com
- Maytag Epic, See www.epicbearing.com
Note: The tool kit rental is not used on the Duets, Elites and Epic front load washers. There is a link to a video that shows you how to change the Duet, Elite and Epic bearings which is actually easier than the Neptune's due to the way the Neptune is designed.
Until next time...
Subscribe to:
Posts (Atom)