I would check the water inlet screens for debris. Shut the water supply off, remove the hoses, use a flashlight and take a look up into the water inlets on rear of your machine, remove any buildup with tweezers or needle nose pliers. The screens are to keep any crap from getting into your water valves which could cause them not to close all the way and let water slowly trickle into your machine when it is off.
What causes this particular shutdown is that the Neptune will shutoff after a certain filling time to prevent an overfill condition. The water inlet screen restriction will cause machine to take longer to fill. Low water pressure can also cause this issue. See Neptune Washer for more Neptune information.
Until next time...
No comments:
Post a Comment