The Maytag repair man does not seem lonely these days...
The main issue is the door latch wax motor. This device will short out and damage the upper machine control board. I'm trying to locate Maytag Neptune owners to educate them on this issue.
Every MAH3000, MAH4000, MAH5500A and the 2000 stacker Neptune shipped will fail unless this device is replaced. Once you have this failure your door will not lock and this prevents the high speed spin from happening. When you open the door you will have sopping wet clothes! Again, this can be prevented by replacing the 12002535 wax motor. See www.neptunewaxmotor.com for details.
Now, as the Neptunes age, the seals are wearing which allows water to get to the bearings. You can get the bearing and seal kit along with the tony tool rental so you can save $750 and keep your machine running another 5 - 10 years. I know money is tight for Neptune owners so I developed this kit to save them money by not purchasing a new washer and dryer. See www.neptunebearing.com for details.
Until next time...
2 comments:
What if the washer does not spin, the door locked light comes on and the R11 and Q6 look normal. What would suggest then?
If the door locked light comes on but still no spin and the R11 on the machine control board is not burnt then I would recommend just replacing the door latch wax motor.
You can order the door latch wax motor on the www.neptunewaxmotor.com order form.
Post a Comment