Showing posts with label neptune washer very loud. Show all posts
Showing posts with label neptune washer very loud. Show all posts

Monday, July 13, 2015

Maytag MAH55FLBWW Bearing and Seal Kit – Where to get parts


I was recently asked if the Maytag Neptune and 12002022 seal kit would work on the MAH55FLBWW Neptune and yes, it will work as well as the special Neptune Bearing tool kit rental.

It turns out that the Maytag Neptune and 12002022 seal kit works on all of the Maytag Neptune front loaders with solid door panel (no window).  Some compatible models include the MAH3000, MAH4000, MAH5500, MAH6500, MAH7500 and commercial solid door panels, too.

Both the Neptune bearing and tub seal kit and tool kit rental include DVD’s to help you save time and effort when changing your tub bearings. You will also learn what to look out for on your Neptune to prevent a future failure, too. The Neptune’s have been out there quite a while and the most of the problems are discovered. One of the disadvantages of a new machine is you will discover the manufacturing flaws and oversights of the design.
 
Why would a Neptune owner want to repair their washer is another question I get on occasion and there are a number of supporting answers.
  • You could be one that desires to get the maximum life out of any appliance or machine such as a car before tossing it aside?
  • You could enjoy the learning experience of repairing your machine or even showing your son how to do it so he can learn mechanical skills and save money on service calls when his appliance fail?
  • Perhaps you don’t like to fill up the scrap yards with appliances that can be repaired?
  • Maybe you don’t have the cash on hand to purchase a new washer and dryer set and don’t want to pay financing charges?
  • If you have a stacker it will be expensive to replace since it is a washer and dryer combo unit?
  • Enjoy your option to replace bearings and seal now - Future washers will probably have a plastic welded tub and you won’t have a choice to replace the bearings and seal anymore but will have to purchase an expensive tub assembly or new washer.
Can you think of any reasons why you would want to repair your Maytag Neptune washer? If so, leave them below…
 
Jeff Hartman
“The Neptune Man”

Wednesday, June 24, 2015

Maytag Neptune Bearing Replacement - Cleaning Tips


As you're replacing your Maytag Neptune bearings and tub seal it would be a good time to perform some housekeeping while in there.

If your washer is over 8 years old you will probably have some soap and debris build up on the backside of the inner stainless steel basket and on the inside of the large outer tub. Some clients have used a power washer to carefully clean their Neptune washers. If you decide to use a power washer make sure you protect any electronic circuit boards and keep them dry. You have the motor control board down by the floor on the right side and the machine control board is located in the top console section.

Another option is to remove the outer tub from cabinet and take out back and spray it so you don't risk getting something wet that should not be wet.

The tub cover has a arched brush on the bottom have to help keep things from getting between the inner basket and outer tub. The brush will probably be gunky. You cannot replace just the brush as it is part of the tub cover.

For more information on replacing your Maytag Neptune bearings and seal see my www.neptunebearing.com page.

Feel free to leave feedback below and let me know how you decided to clean your Neptune washer while you had it apart during your bearing and tub seal change.
 
Jeff Hartman
"The Neptune Man"

Tuesday, December 2, 2014

Maytag Neptune Washer Bearings and Tub Seals – December Tony Tool Rental Special




www.neptunebearing.com – Here is my December, 2014 Tony Tool rental special for Maytag Neptune front load washer owners. The offer expires December 31, 2014 at Midnight Eastern.

If you got value from this ad free video please watch my video http://neptunewasher.blogspot.com/2014/10/jeff-hartman-suggests-way-to-give-back.html about giving back.


Thank you,

Jeff Hartman




Jeff Hartman is known as “The Neptune Man” for offering Maytag Neptune washer parts to save homeowner’s Millions of dollars by repairing their own washers and dryers. See www.neptunewasher.com and www.neptunedryer.com for more appliance repair information. He now offers money saving bearing and seal kits for other makes and models at www.washerbearings.com