Here is one quote from savvydollar.org:
"
Posted: Sat Apr 26, 2008 9:24 pm Post subject:
I've had a Maytag Neptune since 2000. It's been involved in a class action lawsuit. I like the way it washes and spins the heck out of the clothes. That way it takes less time to dry. Trouble is the computer has broken and the door latch switch has broken and something else. Good thing my DH is an engineer and very handy, otherwise this very expensive washer would've been in the dump many years ago! The other thing is you can put a TON of clothes in them and they use WAY less detergent and water than regular washers. They are a great idea, just stay away from Maytag. The next thing that goes on mine will be the last straw! It will be out the door...HTH_________________Jeanette Collopy"
Wow jeanette, you and every Neptune owner will have trouble (if you have not had any yet...), The door latch wax motor is the most common failure and you can prevent it if you replace your wax motor before it fails. My site http://www.neptunewaxmotor.com/ specializes in the Neptune front loaders. The machines that will have this failure are the 2000 Stacker, MAH3000, MAH4000 and the MAH5500A series.
The MAH5500B series is not affected because Maytag replaced the wax motor with a real solenoid to lock the door.
There is a new chapter with the MAH3000's and that is there are two more wax motors in the dispenser area that control the bleach and softener. When these go they will trip the circuit breaker.
Luckily, the machine control board will not be damaged but the timer contacts that control these wax motors could be. See http://neptunewasher.blogspot.com/2008_01_01_archive.html for a photo of a melted down wax motor from the dispenser area.
The next part to go after your Neptune gets older will be the bearings, I have a fix for those as well. You will notice that your Neptune will get louder in the high speed spin cycle to where you can't even share the same space as the Neptune. Folks have told me they were quoted $950 - $1,300 for this repair but with my kit you can get going for under $90.
Until next time...
