Showing posts with label maytag neptune bearing repair. Show all posts
Showing posts with label maytag neptune bearing repair. Show all posts

Saturday, September 9, 2017

Neptune Bearing Tool Kit Upgrade - We are Jamming!



www.neptunebearing.com – Due to Neptuner feedback a jam nut will be included with each Neptune bearing tool kit in case the round nut threads itself off the threaded rod. This will lock the round nut to the shaft. In most cases the Neptune bearing tool works flawlessly but we have had a recent issue so we are nipping it in the bud.

As always, I welcome feedback so I can keep improving the Neptune bearing replacement process.

Thank you,

Jeff Hartman

“The Neptune Man”

P.S. If your washer is giving you the F35 SUD error then visit my www.F35Error.com page for a solution!

Saturday, June 30, 2012

Maytag Neptune Bearing Tool Rental FAQ

Maytag Neptune Bearing Tool Rental FAQ


1. Why is the Tony Tool Rental deposit so much?




1A: I have to request the large deposit since the Tony Tool costs $425 to purchase otherwise I may not get the tool kits back.





2. Does the Tony Tool Rental kit include the bearings and 12002022 seal kit?



2A: Yes, the bearings and 12002022 seal kit are included as well as a Neptune bearing spacer in case yours is cracked.





3. Will the Tony Tool work on my 2000 Stacker model?



3A: Yes, although the DVD will show the standalone Neptune disassembly process... I include a link so you can download the Stacker service manual and it will show you how to disassemble the Stacker. Once inside, they are the same parts where the bearings are concerned. The Neptune bearing and 12002022 seal kit (along with Tony Tool ) work on all solid door panel Neptune front loaders.





4. How long will it take to replace the bearings?



4A: I’ve personally used the Tony Tool and the first bearing job was on a MAH4000 and it took me about 3.5 hours but I was video taping the process. The 2nd bearing replacement was on an MAH5500BWW and it took me 1.5 hours from start to testing machine. One variable is the front bearing and how much rust is in there and that is why it is best to catch the bearing failure as early as possible.





5. Should I replace my door latch wax motor and belt?



5A: If you have a timer knob (non digital) Neptune and it has the original wax motor with brownish color actuator tip I would highly recommend you replace it before it fails. See Neptune Help Song. If you order it and find out you already have the newer black tipped wax motor then just send it back for a refund with the tool. Same with the belt. If you order it and find out your belt is still useable just send it back unopened for a refund.





6. Can I use the revised lip seal if my machine had the earlier lip seal installed?



6A: Not directly. The spinner support shafts are machined differently. If you really want the newer revised lip seal then you would have to order the new spinner support which includes the new revised lip seal then you can send back the 12002022 seal kit for a $40 refund to help offset the new spinner support purchase.


For more information on saving time and effort when replacing your Maytag Neptune bearings see Neptune Bearing.


Until next time...