Neptune Bearing Tool Kit Upgrade - We are Jamming!

www.neptunebearing.com – Due to Neptuner feedback a jam nut will be included with each Neptune bearing tool kit in case the round nut threads itself off the threaded rod. This will lock the round nut to the shaft. In most cases the Neptune bearing tool works flawlessly but we have had a recent issue so we are nipping it in the bud.

As always, I welcome feedback so I can keep improving the Neptune bearing replacement process.

Thank you,

Jeff Hartman

“The Neptune Man”

P.S. If your washer is giving you the F35 SUD error then visit my www.F35Error.com page for a solution!

Maytag Neptune MAH4000 Spin Cycle Power Draw Via Kill A Watt Power Meter Before Tub Bearing Swap

 I was playing with a Kill A Watt power meter and a MAH4000 Maytag Neptune washer to see how much power the Neptune was drawing with an empty basket. I was trying to determine if the power draw could be an indicator that the seal and bearings have failed. This power check was before the bearing replacement…

I also performed the power draw check after the bearing replacement. Go ahead and watch the video.

 Let me know any comments or questions you have below.

 Thank you,

 Jeff Hartman

Jeff Hartman is known as “The Neptune Man” for offering Maytag Neptune washer parts to save homeowner’s Millions of dollars by repairing their own washers and dryers. See http://www.neptunewasher.com and http://www.neptunedryer.com for more appliance repair information. He now offers money saving bearing and seal kits for other makes and models at http://www.washerbearings.com.

Maytag Appliance Parts 22004473 Motor Control Board - LR error code

Maytag Appliance Parts 22004473 Motor Control Board

If you open up the top section you should discover a document in there that has the wiring diagram and diagnostic tests you can run on your Neptune.

The 'LR' error code means Locked Rotor and usually shows up if the motor drive system is not following what the machine control board (MCB) is instructing it to do. The MCB instructs the motor control board how fast and how which direction to rotate the inner basket. I would also check that the belt is still on the pulleys.

Sometimes the motor control board has simply failed and does not rotate the basket or it could be that the speed sensor on the motor has quit working or has a bad connection. I will check all of the connectors in the machine and clean them by removing the connectors and reinstalling them. The sliding action will clean the connector pins if there is oxidation built up on the pins. Just make sure you install the connectors in the exact same position they were originally. When working around the motor control board which is located near the floor I would take a look at the board and see if there are any physical burnt components, leaking or bulging capacitors, etc.

After inspecting all of the connectors in the machine that you can get to I would retest the motor drive. If it does not rotate the basket and you still get the LR error code it is time to replace the motor control board. In 99% of failures the motor control board fails, not the motor. You can visit www.22004473.com for more information on the replacement motor control boards. 

Please visit www.washerbearings.com/parts to order replacement parts other than tub bearings and seal. and enter your model number and they can look up the part you need.

Please leave any comments below if this was helpful.

Jeff Hartman
www.neptunewasher.com
www.neptunedryer.com
www.washerbearings.com

Maytag Neptune Use and Care Manual

Maytag Neptune Use and Care Manual


Hi Neptuner!

A common question that I receive is where can you Neptuners can get a copy of their Neptune front loaders Use and Care guide? Below is a link you can use to download your Use and Care guide for your machine...

www.maytag.com/manuals

I hope this helps!

If you need information on your Maytag Neptune see Neptune Help and if your Neptune sounds like a 747 taking off when entering spin cycle then see Neptune Bearing and get that machine cleared for landing quick! Don't forget that you can rent the Neptune bearing tool kit and save time and effort when changing your bearings.

Until next time...

Brick in a washing machine - Maytag Neptune Owners Don't do it!

Here is a video that some Maytag Neptune owners would like to try...




See Neptune Help and Neptune Bearing before you think about bricking your machine. Besides... this sort of activity will void your warranty :)

She's breaking up... She's breaking up! Don't worry... We can help you repair your Neptune... We have the technology. Actually, you can make your Neptune front load better than it was when it shipped from the factory!


Until next time...

My washer fills with water when off

My washer fills with water when off?



Usually this situation is caused by a failing water valve assembly. I just published a new site at Washer fills with water when off that has some solutions for you.



This can create some problems such as water flowing on the floor depending on how bad the leak is or when it is noticed. I always recommend that you turn off your water supply valves when leaving on vacation in case of a machine or water hose failure.



I would also unplug the power cord as well before you vacation, even if you have a surge suppressor on your washer. I have Maytag Neptune owners who went on vacation and arrived home to a dead Neptune because of a close lightning strike while they were out. You just never know...



So check out Washer fills with water when off to learn more.



Until next time...