Here is the March Neptune bearing tool kit rental special!
Showing posts with label neptune bearing kit. Show all posts
Showing posts with label neptune bearing kit. Show all posts
Thursday, March 5, 2020
Monday, February 11, 2013
Maytag Neptune Bearing Replacement - What not to do when taking your Neptune apart
Maytag Neptune Bearing Replacement - What not to do when taking your Neptune apart
I created this video for all of my Neptune Bearing clients as a tip to save you time and frustration and it has to do with the tub cover after you remove it from your machine.
For more information about how to replace bearings on your washing machine see Washer Bearings.
Don't forget to subscribe to my Youtube channel!
Until next time...
I created this video for all of my Neptune Bearing clients as a tip to save you time and frustration and it has to do with the tub cover after you remove it from your machine.
For more information about how to replace bearings on your washing machine see Washer Bearings.
Don't forget to subscribe to my Youtube channel!
Until next time...
Friday, July 6, 2012
Neptune Washer Bearing – Special tool saves time and effort
Neptune Washer Bearing – Special tool saves time and effort
Maytag Neptune bearing noise
It is obvious that your Neptune’s bearings are failing because your Maytag Neptune sounds like jet taking off when entering the spin cycle. Where do you start? Should you get a quote to have the Neptune repaired? Can you complete the repair yourself and save money? Should you purchase a new washer and dryer? How long will the washer be down? Etc…
Maytag Neptune washer bearing replacement
Let’s start with what a technician will quote you and why you will experience sticker shock. The quote to repair the bearings will run from $800 to $1,000 and the reason is that 99.4% of the repair techs will replace the large outer tub which runs about $500 alone plus labor and maybe a new spinner support in case yours is damaged. The truth is that you cannot tell if the spinner support shaft is damaged until you get in there but from my experience in most cases the spinner support is reusable. You can just replace the bearings and seal and get many more years of life from your Neptune front loader. There are a number of technicians using the Tony Tool to save Neptuner’s money so they won’t suggest that you replace the $500 outer tub.
I do recommend if you’re reading this and your bearings are still functioning that you proactively replace your Neptune bearings if your machine is 10 years old or more.
Maytag Neptune bearing kit
If you’re handy with tools you can replace your Neptune bearings without the special tool kit rental. There are a few things you need to know about how the bearings are installed in the machine. The front bearing is slightly larger than the rear bearing and there is a 1 ¾” pipe (bearing spacer) that is sandwiched between the bearings. When you remove the front tub seal you will see the front bearing and when you look at the front bearing’s ID you will see a tunnel because of the bearing spacer. Then you will see the rear bearing’s inner race where you have about 1/8” lip to grab onto to push or pull it out. The tool kit has a machined round nut that glides through the front bearing and spacer and will catch the rear bearing’s inner race and uses the leverage from the t handle to draw it out. Once the rear bearing comes out the spacer falls out, too.
Upon installation you install the rear bearing first using the tool. Next you place the bearing spacer on the PVC spacer holder and then start to draw the front bearing in. The tool kit makes this a breeze since it keeps the spacer centered while the front bearing is being drawn in and finally clamps the bearing spacer. If you don’t have the tool kit you have to come up with a way to hold the spacer when you install the bearings. So the tool kit rental saves you time and effort.
How to replace your Neptune bearings
The Neptune bearing tool kit rental includes bearings, 12002022 seal kit, a pair of snap ring pliers, 2” wire wheel, emery cloth, step by step DVD and an extra bearing spacer in case yours is cracked or corroded. Note: The earlier Neptune’s have a snap ring that you need to remove before pulling it. The wire wheel is to clean out the bearing housing after bearings are removed and the emery cloth is to smooth the front bearing seat in case of any ridges or ripples that may have developed due to the failed front bearing. The kit is shipped Priority Mail to you so you will receive it within 2 – 3 days typically. The http://www.neptunebearing.com/ site displays the estimated to ship days based on when tool kits return.
The Neptune 12002022 Seal kit
The 12002022 seal kit includes 2 seals. The earlier lip seal and the revised lip seal. You need to use the same one that you removed since they require different shaft machining. I have had some Neptuner’s decide to replace the spinner support so they could install the revised lip seal when their machine originally had the earlier lip seal but it is not necessary.
Maytag Neptune Washer MAH5500BWW bearings
I personally replaced the bearings and seal on a MAH5500BWW washer in 1.5 hours and it was my 2nd time of using the tool kit. I would also recommend having an 8 – 10 pound sledge hammer available when changing the bearings.
If you decide to use the to neptune bearing tool or go it alone you can get everything you will need at Neptune Bearing.
Until next time...
Maytag Neptune bearing noise
It is obvious that your Neptune’s bearings are failing because your Maytag Neptune sounds like jet taking off when entering the spin cycle. Where do you start? Should you get a quote to have the Neptune repaired? Can you complete the repair yourself and save money? Should you purchase a new washer and dryer? How long will the washer be down? Etc…
Maytag Neptune washer bearing replacement
Let’s start with what a technician will quote you and why you will experience sticker shock. The quote to repair the bearings will run from $800 to $1,000 and the reason is that 99.4% of the repair techs will replace the large outer tub which runs about $500 alone plus labor and maybe a new spinner support in case yours is damaged. The truth is that you cannot tell if the spinner support shaft is damaged until you get in there but from my experience in most cases the spinner support is reusable. You can just replace the bearings and seal and get many more years of life from your Neptune front loader. There are a number of technicians using the Tony Tool to save Neptuner’s money so they won’t suggest that you replace the $500 outer tub.
I do recommend if you’re reading this and your bearings are still functioning that you proactively replace your Neptune bearings if your machine is 10 years old or more.
Maytag Neptune bearing kit
If you’re handy with tools you can replace your Neptune bearings without the special tool kit rental. There are a few things you need to know about how the bearings are installed in the machine. The front bearing is slightly larger than the rear bearing and there is a 1 ¾” pipe (bearing spacer) that is sandwiched between the bearings. When you remove the front tub seal you will see the front bearing and when you look at the front bearing’s ID you will see a tunnel because of the bearing spacer. Then you will see the rear bearing’s inner race where you have about 1/8” lip to grab onto to push or pull it out. The tool kit has a machined round nut that glides through the front bearing and spacer and will catch the rear bearing’s inner race and uses the leverage from the t handle to draw it out. Once the rear bearing comes out the spacer falls out, too.
Upon installation you install the rear bearing first using the tool. Next you place the bearing spacer on the PVC spacer holder and then start to draw the front bearing in. The tool kit makes this a breeze since it keeps the spacer centered while the front bearing is being drawn in and finally clamps the bearing spacer. If you don’t have the tool kit you have to come up with a way to hold the spacer when you install the bearings. So the tool kit rental saves you time and effort.
How to replace your Neptune bearings
The Neptune bearing tool kit rental includes bearings, 12002022 seal kit, a pair of snap ring pliers, 2” wire wheel, emery cloth, step by step DVD and an extra bearing spacer in case yours is cracked or corroded. Note: The earlier Neptune’s have a snap ring that you need to remove before pulling it. The wire wheel is to clean out the bearing housing after bearings are removed and the emery cloth is to smooth the front bearing seat in case of any ridges or ripples that may have developed due to the failed front bearing. The kit is shipped Priority Mail to you so you will receive it within 2 – 3 days typically. The http://www.neptunebearing.com/ site displays the estimated to ship days based on when tool kits return.
The Neptune 12002022 Seal kit
The 12002022 seal kit includes 2 seals. The earlier lip seal and the revised lip seal. You need to use the same one that you removed since they require different shaft machining. I have had some Neptuner’s decide to replace the spinner support so they could install the revised lip seal when their machine originally had the earlier lip seal but it is not necessary.
Maytag Neptune Washer MAH5500BWW bearings
I personally replaced the bearings and seal on a MAH5500BWW washer in 1.5 hours and it was my 2nd time of using the tool kit. I would also recommend having an 8 – 10 pound sledge hammer available when changing the bearings.
If you decide to use the to neptune bearing tool or go it alone you can get everything you will need at Neptune Bearing.
Until next time...
Tuesday, April 8, 2008
What is all of this Maytag Neptune Bearing Stuff?
My Maytag Neptune bearing & seal kit has become a hit as this is the first time these kits were offered to Neptune owners.
I wanted to offer a couple of tidbits from the folks who have installed these Neptune bearing kits already:
Some have had trouble getting the spinner support out. In these cases it was determined that the bearings were really shot and sounded like a jet taking off during high speed spin... So the key is to replace the bearings early before the real damage sets in.
Tip: If your Neptune is +8 years old you might want to consider replacing them and the seal kit before your machine sounds out to you as a preventative measure. The bearing replacement task will go much smoother with less or no bearing damage.
I had one customer where the spinner support stopped dead while in high speed spin cycle and broke two of the three arms of the spinner support. This type of failure could create a safety hazard to other components in your machine if you let the bearings go too long.
I hope these tidbits will help you determine if your Neptune bearings and seal should be replaced soon.
See http://www.neptunebearing.com to order the Maytag Neptune Bearing & seal kit
today.
Subscribe to:
Posts (Atom)