Showing posts with label Neptune Bearing Tool. Show all posts
Showing posts with label Neptune Bearing Tool. Show all posts

Thursday, November 1, 2018

Maytag Neptune Bearing Tool Rental Special for November 2018



Here's November's (2018) special when you rent the Neptune bearing tool kit which includes bearings, OEM 12002022 seal kit, bearing spacer, emery cloth, snap ring pliers, 2" wire wheel and step by step DVD.


Click HERE for more information and to order!


Thank you,



Jeff Hartman
"The Neptune Man"


Check out my other money saving sites www.F35Error.com and www.F01Error.com for Whirlpool washer and dryers. Fix it yourself and save!

Friday, July 6, 2012

Neptune Washer Bearing – Special tool saves time and effort

Neptune Washer Bearing – Special tool saves time and effort




Maytag Neptune bearing noise

It is obvious that your Neptune’s bearings are failing because your Maytag Neptune sounds like jet taking off when entering the spin cycle. Where do you start? Should you get a quote to have the Neptune repaired? Can you complete the repair yourself and save money? Should you purchase a new washer and dryer? How long will the washer be down? Etc…


Maytag Neptune washer bearing replacement

Let’s start with what a technician will quote you and why you will experience sticker shock. The quote to repair the bearings will run from $800 to $1,000 and the reason is that 99.4% of the repair techs will replace the large outer tub which runs about $500 alone plus labor and maybe a new spinner support in case yours is damaged. The truth is that you cannot tell if the spinner support shaft is damaged until you get in there but from my experience in most cases the spinner support is reusable. You can just replace the bearings and seal and get many more years of life from your Neptune front loader. There are a number of technicians using the Tony Tool to save Neptuner’s money so they won’t suggest that you replace the $500 outer tub.

I do recommend if you’re reading this and your bearings are still functioning that you proactively replace your Neptune bearings if your machine is 10 years old or more.


Maytag Neptune bearing kit

If you’re handy with tools you can replace your Neptune bearings without the special tool kit rental. There are a few things you need to know about how the bearings are installed in the machine. The front bearing is slightly larger than the rear bearing and there is a 1 ¾” pipe (bearing spacer) that is sandwiched between the bearings. When you remove the front tub seal you will see the front bearing and when you look at the front bearing’s ID you will see a tunnel because of the bearing spacer. Then you will see the rear bearing’s inner race where you have about 1/8” lip to grab onto to push or pull it out. The tool kit has a machined round nut that glides through the front bearing and spacer and will catch the rear bearing’s inner race and uses the leverage from the t handle to draw it out. Once the rear bearing comes out the spacer falls out, too.

Upon installation you install the rear bearing first using the tool. Next you place the bearing spacer on the PVC spacer holder and then start to draw the front bearing in. The tool kit makes this a breeze since it keeps the spacer centered while the front bearing is being drawn in and finally clamps the bearing spacer. If you don’t have the tool kit you have to come up with a way to hold the spacer when you install the bearings. So the tool kit rental saves you time and effort.


How to replace your Neptune bearings

The Neptune bearing tool kit rental includes bearings, 12002022 seal kit, a pair of snap ring pliers, 2” wire wheel, emery cloth, step by step DVD and an extra bearing spacer in case yours is cracked or corroded. Note: The earlier Neptune’s have a snap ring that you need to remove before pulling it. The wire wheel is to clean out the bearing housing after bearings are removed and the emery cloth is to smooth the front bearing seat in case of any ridges or ripples that may have developed due to the failed front bearing. The kit is shipped Priority Mail to you so you will receive it within 2 – 3 days typically. The http://www.neptunebearing.com/ site displays the estimated to ship days based on when tool kits return.


The Neptune 12002022 Seal kit

The 12002022 seal kit includes 2 seals. The earlier lip seal and the revised lip seal. You need to use the same one that you removed since they require different shaft machining. I have had some Neptuner’s decide to replace the spinner support so they could install the revised lip seal when their machine originally had the earlier lip seal but it is not necessary.


Maytag Neptune Washer MAH5500BWW bearings

I personally replaced the bearings and seal on a MAH5500BWW washer in 1.5 hours and it was my 2nd time of using the tool kit. I would also recommend having an 8 – 10 pound sledge hammer available when changing the bearings.

If you decide to use the to neptune bearing tool or go it alone you can get everything you will need at Neptune Bearing.

Until next time...
















Monday, June 1, 2009

It looks like the Neptune Bearing Song votes are in...

Here is the song update:

It looks like the Neptune Bearing Song was Pretty Good according to your votes.

We only had one not impressed?

This particular song is on the www.neptunebearing.com site if you would like to hear it again...

There is another song in the works for the www.neptunekits.com site which is for Neptune service technicians. It is where they can purchase the Neptune Bearing Tool (Tony Tool) and bearings in bulk. If you talk to any technicians that suggest to you that you cannot change the bearings, send them there and educate them...


Don't forget when your Neptune Bearings start singin' and a screamin' you can replace your Neptune bearings and save lots of money!

Friday, May 15, 2009

The Maytag Neptune Bearing Song is ready!

Hi Neptuners!

I added the new Neptune Bearing Song to the http://www.neptunebearing.com/ website.

Check it out and let me know if you like it by casting your vote on the poll to the right. I will keep the poll open until May 24th @ 11:59 p.m.

Until next time...

Jeff

Saturday, April 25, 2009

Calling all Maytag Neptune Technicians

Hi Neptuners,

If you are a Neptune technician and you are tired of getting kicked out of folks' home after handing them a ridiculous $900 bearing repair quote then see http://www.neptunekits.com/special/ where you can order your own Neptune bearing tool kit and bearings in bulk. Offer them a $150 - $225 repair quote instead... Now you can also receive potential future Neptune repair business as well because they did not junk their Neptune.

I get emails from Neptune owners asking if I have any technicians in their area who have the special Neptune Bearing tool. Let's face it, not everyone wants to change their Neptune bearings themselves and would like someone who has the Neptune bearing tool to do it for them.

Well, what are you waiting for? http://www.neptunekits.com/special/

Until next time...