Will the Maytag bearing and seal kit that you are selling work on all Maytag Neptunes?

Here is another bearing question I received regarding the Maytag Neptune bearing kit...

Q: "Will the Maytag bearing and seal kit that you are selling work on all Maytag Neptunes? I have the MAH6500AWQ that sounds like a jet engine. I have also read that if you change the bearings you should also change the shaft...is that correct? If so do you have the shaft for the Neptune as well?"

A: Yes, the bearing and seal kit will work with all Maytag Neptune front loaders. Presently, the common residential models are the MAH3000, MAH4000, MAH5500, MAH6500 and the 2000 stackers. The reason is that these machines have been in service for at least 4 years.

The shaft is called the spinner support and you don't have to change it if it is not damaged. I have only sold a couple of the spinner supports in the last year. One failed when the tub came to a screeching halt due to the seal and bearing failure and the second spinner support just failed (one arm bolt rusted out causing tub to wobble and trip inertia/balance sensors) but the customer decided to go ahead and replace the bearings and seal since he had to take it apart to replace the spinner. The last time I shipped a spinner support it was $95 including UPS Ground shipping.


The Neptune bearing and Maytag 12002022 seal kit can be purchased from http://www.neptunebearing.com/ and you should look into taking advantage of the tonytool rental program to save you time on the bearing and seal change plus it includes use of the DVD which Tony and Shirley show you how to disassemble your Neptune, replace bearings and install the new seal kit in about 14 minutes.

For coin Laundromats, you can purchase multiple bearing & seal kits along with the tonytool at http://www.neptunekits.com/. We find that Laundromats can have a large number of Neptune front loaders and they can save considerable amount of money replacing their bearings instead of replacing the large expensive outer tub. We recommend replacing the bearings and seal as a preventative measure to prevent washer down time.

Lastly, for all of your Neptune needs, see http://www.neptunehelp.com/.

I have a 4 year old Neptune MAH55FLBWQ Washer and the bearing is shot. Will this kit fit this model?

This was a valid question I received today regarding the Maytag Neptune bearing kit... 

Yes, the Maytag Neptune bearing and seal kit will fit your Neptune. See www.neptunebearing.com for more info on the tonytool rental program that helps you change your bearings in about an hour and a half and includes access to a video that shows you how to take your Neptune apart, replace bearings and install the seal kit.

Until next time...