Kenmore Elite's have bearing issues too?

Kenmore Elite - Do these front loaders have bearing issues too?

I have been offering Maytag Neptune owner's the bearing and seal kits for about 2 years now at Neptune Bearing.

Recently, I had emails from 2 Elite owners that needed bearings. One was for an HE3 machine that was 3 years old and the second was an HE2 model. Does anyone build a washing machine that will last? I have an Elite HE3 and it is still working... (Knock on wood)

Well, don't fret Elite owners... I just put up a website where you can purchase replacement bearings and seal. See Elite Bearing for details.

You can also replace the outer tub as these are not too expensive yet because they are still in production. But once they are out of production the price will go up considerably just like the Maytag Neptune outer tub has.

Until next time...

front load washers - Maytag Neptune Update

Front load washers are here to stay! Do you own an earlier Maytag Neptune front loader? If so, you need to be aware of some reliability issues.

First, the door latch wax motor is probably the most problematic component on the Neptune. The original devices short out over time and burn the R11 resistor and the Q6 triac on the machine control board. You can prevent your R11 & Q6 failure by proactively replacing your faulty door latch wax motor. The part number is 12002535 and you can purchase the new replacement at http://www.neptunehelp.com/.

If you have a MAH3000 Neptune, you could have 3 wax motors in there waiting to fail... The soap dispenser on the earlier MAH3000's have 2 wax motors that control the bleach and softener flow and should be replaced.

The original wax motors have the brownish color actuator pin and the new design has the black pin.

Next, we will talk about the next item you should be aware of being a Neptuner.