Neptune Bearing Replacement - How To

Neptune Bearing Replacement - How To

 If you have a Maytag Neptune Front load washer there will come a time when it starts to morph into a jet plane or even a freight train..


Since you probably don't want a jet plane in your home you will want to replace your Neptune tub bearings and seal asap.

You can replace your washer bearings without the special Neptune bearing replacement tool or Tony Tool if you're handy with tools. The tool kit does save you time and effort when changing your bearings. The tool kit rental includes the tub bearings, 12002022 seal kit, bearing spacer, 2" wire wheel and step by step DVD. You can order the Maytag Neptune bearing and 12002022 Seal Kit HERE and it works on all solid door (no window) panel Neptune's. 

You can find other washer bearing and seal kits HERE.

I hope this post was helpful.

Thank you,

Jeff Hartman

P.S. For other appliance parts you can visit www.washerbearings.com/parts get new replacement parts for your appliances.

Otherwise you can always use the Neptune Washer Back up Plan which is shown below...

W10202464 - Whirlpool Duet Front Load Washer Part - Crosspiece Support Bracket Information

Here is information on the W10202464 Cross Arm (crosspiece) support bracket assembly used in the Whirlpool Duet front load washers. It mounts the the rear of the inner stainless steel basket assembly. Some clients know it as the 'spider'.

Note: The W10202464 is no longer available separate from Whirlpool. You will need to purchase the basket which includes the new W10202464 cross arm support.

The model numbers affected are:

IFW7300WW00
IFW7300WW01
IFW7300WW02
WFW9050XW00
WFW9050XW01
WFW9050XW02
WFW9150WW00
WFW9150WW01
WFW9150WW02
WFW9151YW00
WFW9250WL00
WFW9250WL01
WFW9250WL02
WFW9250WR00
WFW9250WR01
WFW9250WR02
WFW9250WW00
WFW9250WW01
WFW9250WW02
WFW9351YL00
WFW9351YW00
YIFW7300WW00
YWFW9050XW00
YWFW9151YW00
YWFW9351YL00
YWFW9351YW00

If you need Whirlpool Duet tub bearings and seal kit see Duet Bearing.


Thank you,

Jeff Hartman

What are the top 10 mistakes people make in filing a tax return?

   Here are the top 10 mistakes people make in filing a tax return?

10. Failure to sign return or attach check.
  9. Failure to file estimate.
  8. Failure to advise of address changes.
  7. Failure to file return for the year taxpayer moves in or out.
  6. Failure to allocate taxes paid when allocating income for move-in/move-out year.
  5. Failure to pay 2nd, 3rd and 4th quarter estimated tax payments.
  4. Failure to mail return.
  3. Failure to attach Schedules/Forms and statements.
  2. Failure to attach W-2.
  1. Failure to use gross compensation.

If your washing machine is taxing you by sounding like a freight train or jet plane then you need to replace your tub bearings and seal. See Washer Bearings for a solution.

You can replace your bearings and seal and save some cash!

Jeff Hartman

Maytag Neptune MAH9700 Bearing and Seal Kit

Maytag Neptune MAH9700 Bearing and Seal Kit:

We have just released the MAH9700 Bearing and Seal kit for those machines that sound like a jet plane taking off. See MAH9700 Bearing and Seal Kit for more information.

No special tools are required to replace your MAH9700 bearings and tub seal. I would expect a few hours to complete the task depending on how much cleaning you do while you have your washer apart.

When you purchase the MAH9700 tub bearings and seal you will receive an email with more information including a link where you can download the service manual.

Let me know if you need anything else by leaving a comment.

For other appliance parts ( other than washer tub bearing and seal kits) you can visit my www.washerbearings.com/parts and enter your model number. 


Jeff Hartman
www.neptunewasher.com
www.neptunedryer.com
www.washerbearings.com

Maytag Appliance Parts 22004473 Motor Control Board - LR error code

Maytag Appliance Parts 22004473 Motor Control Board

If you open up the top section you should discover a document in there that has the wiring diagram and diagnostic tests you can run on your Neptune.

The 'LR' error code means Locked Rotor and usually shows up if the motor drive system is not following what the machine control board (MCB) is instructing it to do. The MCB instructs the motor control board how fast and how which direction to rotate the inner basket. I would also check that the belt is still on the pulleys.

Sometimes the motor control board has simply failed and does not rotate the basket or it could be that the speed sensor on the motor has quit working or has a bad connection. I will check all of the connectors in the machine and clean them by removing the connectors and reinstalling them. The sliding action will clean the connector pins if there is oxidation built up on the pins. Just make sure you install the connectors in the exact same position they were originally. When working around the motor control board which is located near the floor I would take a look at the board and see if there are any physical burnt components, leaking or bulging capacitors, etc.

After inspecting all of the connectors in the machine that you can get to I would retest the motor drive. If it does not rotate the basket and you still get the LR error code it is time to replace the motor control board. In 99% of failures the motor control board fails, not the motor. You can visit www.22004473.com for more information on the replacement motor control boards. 

Please visit www.washerbearings.com/parts to order replacement parts other than tub bearings and seal. and enter your model number and they can look up the part you need.

Please leave any comments below if this was helpful.

Jeff Hartman
www.neptunewasher.com
www.neptunedryer.com
www.washerbearings.com

Maytag Neptune Washer Seal Replacement - How to replace

Maytag Neptune washer seal replacement - If you notice your Maytag Neptune front load washer starting to sound like a freight train you should know that it is time... Time to replace your Maytag Neptune bearing and seal. Although, you can rent the special Neptune bearing tool kit you can replace the bearings without it. The photo above shows the Neptune bearing and a revised lip seal, o ring and installation cup. If you have the earlier lip seal you cannot install the revised lip seal because the spinner support shaft is machined different than the spinner support shaft that uses the revised lip seal. If you replace the Neptune spinner support it will come with the revised lip seal. I would recommend having a large 8 pound hammer available just in case when replacing your Neptune tub bearings... Let me know if you have any questions. Jeff Hartman

How To Remove a Bathtub Drain With Broken Cross Members and Install New Drain

How To Remove a Bathtub Drain With Broken Cross Members and Install New Drain

How To Remove a Bathtub Drain and Install New Drain - I am going to show you how I removed a bathtub drain with a tub drain removal tool (tub drain extractor). This particular drain was corroding away and eventually water could start sneaking under the bathtub. 

Note: The tub drain instructions called out for some plumber's putty which I did not display in the beginning of video.

In addition, the cross hair support that holds the stopper in place broke away too so I just had an open bath drain which opens up the risk of caps and other items going down the drain.

If you have a washer that needs the bearings and seal replaced please visit my website and I will help you!

Jeff Hartman