Maytag Neptune Washer Seal Replacement - How to replace

Maytag Neptune washer seal replacement - If you notice your Maytag Neptune front load washer starting to sound like a freight train you should know that it is time... Time to replace your Maytag Neptune bearing and seal. Although, you can rent the special Neptune bearing tool kit you can replace the bearings without it. The photo above shows the Neptune bearing and a revised lip seal, o ring and installation cup. If you have the earlier lip seal you cannot install the revised lip seal because the spinner support shaft is machined different than the spinner support shaft that uses the revised lip seal. If you replace the Neptune spinner support it will come with the revised lip seal. I would recommend having a large 8 pound hammer available just in case when replacing your Neptune tub bearings... Let me know if you have any questions. Jeff Hartman

You can now spread your Neptune bearing replacement over 6 months, if needed

For my bearing and seal business I use PayPal, which accepts major credit cards, and they are offering an option when checking out for orders over $99, U.S. customers only, where you can get 6 monthly payments same as cash. So… if you've been putting off that bearing replacement now is the time for you to add more years to your Neptune’s life and spread the bill over 6 months with no interest.

See Neptune Bearing replacement and click on the PayPal banner on the left side for offer details.

If you decide to just purchase the Maytag Neptune Bearing and 12002022 Seal kit (not rent the tool kit) then you could add the door boot or belt so you exceed the $99 order amount to qualify. If you have an MAH3000, MAH4000 model you may want to order the bearing spacer just to have on hand in case yours is cracked or really corroded. If you decide to order a belt and don’t need it after inspecting your belt then simply send it back unopened for a refund. Don’t forget that a new bearing spacer is included with the Tony Tool kit rental so you don’t need to order one.

If you decide use the 6 months option just make sure you make payments to avoid any interest charges.

Other options if your Neptune washer needs bearings:

Use a local laundromat until you can save enough for bearing replacement
Buy a used unit on Craigslist
Visit relatives, neighbors and wash your clothes
Use washing board. See Neptune backup plan

Leave me a comment if you have another suggestion on where to launder your clothes until your machine can get fixed.

TIP: When sorting clothes check the pants pockets for loose change that can get into the pump and cause draining problems. 

I also offer other washer bearing and seal kits...  See Washer Bearings for more information.


Until next time...

Neptune Bearing Spacer. Note: beveled end goes towards smaller rear bearing

Maytag Neptune Front Loader tub bearing replacement tip

Maytag Neptune Front Loader tub bearing replacement tip

If your Maytag Neptune front loader is at least 10 years old I am highly recommending that you replace your tub bearings and seal proactively and let me explain why.


Eliminate the #1 Tony Tool challenge which is getting the rusted front bearing out…
As you know… I rent the specially designed Tony Tool to Neptune owners to assist them when changing their bearings and seal and I will tell you the number one challenge when changing the bearings is getting the front bearing out. In the past, Neptuner’s only replaced their bearings after the machine sounds like a jet taking off because the seal has leaked water into the bearings. What happens next is that rust forms between the front bearing outer race and the aluminum bearing housing making the front bearing difficult to extract. If you replace the bearings before they rust… the front bearing will come much easier with less stress to the machine. The tool kit rental comes with a pair of snap ring pliers, 2" wire wheel, extra bearing spacer and emery cloth as well as the bearings and 12002022 seal kit. A DVD is included that shows you how to disassemble your Neptune, swap bearings and install the seal kit. You can order the tool kit rental at Neptune Bearing.  Go down about half way and click where is says " Click HERE to read the tool rental agreement & order. Once the tool rental agreement opens up then there will be an Add to Cart button on the left side. Click on the Add to Cart button and you will be taken into PayPal's secure server to complete the payment.

Prevent spinner support (shaft) damage…
In some Neptune bearing failure cases the spinner support shaft was damaged because a bearing hung up and that caused a groove in the shaft so it had to be replaced at $89.00. The upfront cost for a new spinner support is $129 delivered via UPS Ground but I allow you to send the 12002022 seal kit back with the tool kit rental for an additional $40 refund because the spinner support arrives with a revised lip seal so you won’t need the 12002022 seal kit I sent you with the tool kit. The $40 seal kit refund takes the $129 down to $89. See Spinner Support to order a new spinner support.

The tool rental queue is lower than usual so you will get it quicker…
I will admit that the Neptune bearing tool kit rental queue is low right now which means that you will get a tool kit quicker than usual and that is a good thing. In the past I would have anywhere from 8 to 15 people in the queue with all of the tool kits out in the field. However, it is less critical in your case because your machine is not down and you are being proactive.

You can control washer downtime by replacing your bearings proactively…
Another benefit being proactive is that you control the washer downtime. You can do all of the laundry before you start the disassembly so there is less pressure to complete the bearing swap out. If your bearings fail and there are a large number of Neptuner’s in the queue that will delay you receiving the tool kit and then that would mean visits to the Laundromat or relative’s houses to do your laundry.

Take the time to really clean your Neptune while you have it apart…
Does your Neptune smell funky? I get lots of feedback from Neptuner’s and they tell me that they took extra time to really clean out their Neptune while they had it apart to freshen it up. There are simply areas that you cannot get to and properly clean until you disassemble the machine. From there, you can start a regimen of using the Affresh tablets or other front load cleaning product to help prevent the buildup of smelly gunk and keep your machine smelling better. You may also consider replacing the door boot while you change your bearings and seal. You can order one for $49.00 when your rent the tool kit.

Other parts you may want to replace while your Neptune is disassembled…
To wrap it up... Don’t forget that you can also get the new Neptune belt for $26.00 and the new door boot for $49.00 from the Neptune Bearing order form. If you take machine apart and decide your belt still looks good then just send it back with the tool kit unopened for a $26 refund. If you have a timer knob then you will want to make sure that you replace your door latch wax motor before it fails. Order extra wax motors for only $12 when you rent the tool kit!

Top 5 reasons to proactively change your Neptune front loader bearings.
1. #1 tool kit rental challenge is eliminated as the front bearing will come right out

2. Prevent potential damage to the spinner support

3. The Neptune bearing rental queue is very low right now

4. Totally prevent unexpected downtime and Laundromat visits

5. Funky Smelling Neptune’s can be really cleaned out when they are disassembled

Again, here is that link to order the Neptune bearing tool kit rental...  Neptune Bearing.


Until next time...

Neptune Bearings - airplane or jet sound while spinning

Neptune Bearings - airplane or jet sound while spinning

Ok, you thought you bought a Maytag Neptune front load washer... but now it has morphed into an airplane!

Below is a nice video to show you what to listen for so you can repair your Neptune and get another 5 - 10 years out of it.




See www.neptunebearing.com for the replacement bearings and you can rent a special tool kit that will save you time and effort plus comes with a instructional DVD for the home owner!

If you bother ol' Lonely be prepared to receive a $900 quote to replace the large outer tub plus labor, etc. Why replace the $500 outer tub when you can replace the bearings?

If you catch the bearing failure early then you don't have to replace spinner support but just in case, you can order the Spinner Support. Keep in mind that the spinner support comes with a seal kit so you can return the 12002022 seal kit for a $40 refund which almost cuts the spinner support cost in half when you purchase kit at Neptune Bearing!

One last thing... Other front loaders have the same morphing issue, too! If you're the proud owner of a:

• Whirlpool Duet, see www.duetbearing.com


• Whirlpool Duet Sport, see www.duetbearing.com


• Kenmore Elite, See www.elitebearing.com


• Maytag Epic, See www.epicbearing.com

Note: The tool kit rental is not used on the Duets, Elites and Epic front load washers. There is a link to a video that shows you how to change the Duet, Elite and Epic bearings which is actually easier than the Neptune's due to the way the Neptune is designed.

Until next time...

Maytag Neptune Bearing 12002022 Revised Seal Install How-To

Maytag Neptune Bearing 12002022 Revised Seal Install How-To for solid door Neptune front loaders


Hi Neptuner!

I have to say that I am impressed… I asked a Neptuner to shoot his Neptune… oops, I meant shoot some video when replacing the revised lip seal on a Maytag Neptune front load washer and Jeff C. stepped up and sealed the deal!

Here is the video I put together from Jeff’s footage he shot after replacing his (MAH5500B series) Neptune bearings and 12002022 seal kit. It shows the revised lip seal installation. Jeff also purchased a new Neptune Spinner Support for his machine. If you purchase a Neptune bearing and seal kit from me and buy the new spinner support I will refund $40 when you send the 12002022 seal kit back. The new spinner support comes with a revised seal kit. This will offset your spinner support payment by $40!

If you’re not aware… The Neptune 12002022 seal kit includes 2 seals so it will work on both spinner support designs. The thinner seal is the earlier seal and should be used if your machine had the white plastic spacer ("a" clip) between the front bearing and seal. That video is here. The thicker seal is the revised lip seal.

Note: When installing the revised lip seal make sure that the ribs are towards the front bearing and the smooth section will be towards the stainless steel tub so it is not in backwards.




See Neptune Bearing for more information. I also offer the 12002533 door boot, 12002535 wax motor and the 12001788 belt at a discount when you rent the Neptune bearing tool kit.


Until next time...

Maytag Neptune Question about the W10181639 Spinner Support

Hi Neptuner!

Here is a Maytag Neptune Spinner Support question that I received lately...

"I have a spinner support with a broken bolt stud. Can you replace the bolt studs in the spinner support, or do you have to replace the entire spinner support? If I have to replace the spinner support, do you have them and what does it cost? I will also replace the bearing and seal when I fix the spinner support."

A: I've had Neptuners successfully replace a broken stud on the spinner supports. You will want stainless steel replacement hardware. Sometimes the end of the spinner support arm corroded away and the spinner support needed replaced. You can order a new Neptune spinner support at w10181639.com. Note: I have a photo of a brand spankin' new spinner support above...

In addition, the new spinner support comes with the revised lip seal, too. So if you're replacing your bearings you can get a $40 refund if you purchased bearings from Neptune Bearing or even rented the Neptune bearing tool kit which almost pays for half of the new spinner support! Please don't open the 12002022 seal kit... just send it back for your $40 refund...

Don't forget to replace your 12002535 door latch wax motor if you have an earlier timer version (non digital) Neptune front loader with the original one still in it before it chokes and smokes your machine control board. See Neptune Help for more information.

Until next time...

Maytag Neptune Front Load Spinner Support - W10181639

Maytag Neptune Front Load Spinner Support - W10181639

Hi Neptuners!


Does your Neptune Sound like a rock tumbler? If so, it is possible one of the three bolts snapped on your spinner support where it bolts to the stainless steel inner tub. In these cases, you can try to get a new stainless steel bolt and nut and see if you can repair it... but if it does not work you can replace your spinner support.


I just put up a Maytag Neptune Spinner site where you can purchase it directly. The new W10181639 spinner support even comes with a 'revised lip' seal kit so if you need bearings, see Neptune Help to order replacement bearings for your solid door panel Neptune without the 12002022 seal kit and save some money.