Here is a new book just off the printing press that just may rewrite the history books...
The title is "Iron Age America before Columbus".
It was written by William D. Conner, who is my father-in-law and it is now available at Amazon!
The publisher is Coachwhip Books, who is based out of Lancaster County, Pa.
If you are into America's History or you want to be involved in the rewriting of the History books then check this book out today!
If you are interested in an autographed copy please contact me and I will help you get one...
Here is the link again....
Until next time....
"Everyone knows someone who owns a Maytag Neptune..."
Neptune Help
Neptune Bearing
Neptune Kits
Thursday, November 26, 2009
Sunday, November 22, 2009
Maytag Neptune How to video - Wax Motor inspection
Maytag Neptune Washer Video - How to disassemble your Neptune for Wax Motor Inspection
I get the question "How do I know if I have the faulty wax motor in my Neptune's door latch?" all of the time so I decided to create a video that shows the Neptune disassembly.
See www.Neptunehelp.com to order your replacement 12002535 wax motor. Maytag redesigned the wax motor and when they did they specified that the tip be black so you could easily identify if you have the faulty design or the new design.
I have a cute video at www.NeptuneHelpSong.com that explains what happens if you don't proactively change your faulty door latch wax motor.
If your machine has a timer knob (non digital) then yours shipped with the faulty wax motor.
Until next time...
"Everyone knows someone who owns a Maytag Neptune..."
Saturday, October 31, 2009
Maytag Neptune repair - door latch wax motor
Maytag Neptune Repair
I just finished a new video that shows how to replace the door latch wax motor in the maytag neptune door latch. Here is the Neptune Wax Motor Video link.
If you have a Maytag Neptune front loader with a timer knob you will want to inspect your wax motor and make sure it has a black actuator pin. If it has the brownish color actuator pin then you will want to replace it as soon as possible.
Keep in mind that if you have a MAH3000 model with the serial number starting with a 10 thru 25 then you will have two more wax motors in the soap dispenser. These control the bleach and softener flows.
See Neptune help for more valuable Neptune front loader information.
Monday, October 12, 2009
Kenmore Elite's have bearing issues too?
Kenmore Elite - Do these front loaders have bearing issues too?
I have been offering Maytag Neptune owner's the bearing and seal kits for about 2 years now at Neptune Bearing.
Recently, I had emails from 2 Elite owners that needed bearings. One was for an HE3 machine that was 3 years old and the second was an HE2 model. Does anyone build a washing machine that will last? I have an Elite HE3 and it is still working... (Knock on wood)
Well, don't fret Elite owners... I just put up a website where you can purchase replacement bearings and seal. See Elite Bearing for details.
You can also replace the outer tub as these are not too expensive yet because they are still in production. But once they are out of production the price will go up considerably just like the Maytag Neptune outer tub has.
Until next time...
I have been offering Maytag Neptune owner's the bearing and seal kits for about 2 years now at Neptune Bearing.
Recently, I had emails from 2 Elite owners that needed bearings. One was for an HE3 machine that was 3 years old and the second was an HE2 model. Does anyone build a washing machine that will last? I have an Elite HE3 and it is still working... (Knock on wood)
Well, don't fret Elite owners... I just put up a website where you can purchase replacement bearings and seal. See Elite Bearing for details.
You can also replace the outer tub as these are not too expensive yet because they are still in production. But once they are out of production the price will go up considerably just like the Maytag Neptune outer tub has.
Until next time...
Wednesday, September 30, 2009
Maytag Neptune Bearing Tony Tool - Testimonials
Maytag Neptune Bearing Tony Tool - Testimonials
Ok, I have to just pass these along... Here are a couple of Neptune owners that recently rented the Tony Tool and saved over $700 by replacing their bearings!
#1
"Just wanted you to know the tonytool worked great. Neptune washer is up and running again. Received tonytool on monday sept 28 repaired washer on tuesday sept 29 mailed tonytool back wednesday morning sept 30 by priority mail. I was considering scraping the washer before seeing your site. The bearing replacement job is nothing a person with average mechanical skills can't do. Thanks for all your help"
Curtis F.
#2
"The Tony Tool system is superb. The installation process went forward without a problem. The tool worked flawlessly. The additional tools like the snap ring pliers and wire brush were nice touches. The DVD step by step instructions made reading instructions unnecessary. Although I’d worked on old style Maytags before, the Neptune was new to me. Even so, I completed the whole job including clean-up in less than 2 hours. All the parts needed were included; nothing was overlooked. I’d definitely do business with you guys again! Thanks."
Mark Baker
As you can see the Tony Tool is the solution for your 'Out of Control' Neptune bearings... The Tony Tool is available at www.neptunekits.com along with bulk bearing and 12002022 seal kits.
Don't forget to change your 12002535 door latch wax motor when you have it apart... All of the Neptune front loaders with timer knob run the risk of damaging R11 and Q6 on the machine control board. See www.neptunehelpsong.com for the cool video that explains the issue.
Until next time...
Ok, I have to just pass these along... Here are a couple of Neptune owners that recently rented the Tony Tool and saved over $700 by replacing their bearings!
#1
"Just wanted you to know the tonytool worked great. Neptune washer is up and running again. Received tonytool on monday sept 28 repaired washer on tuesday sept 29 mailed tonytool back wednesday morning sept 30 by priority mail. I was considering scraping the washer before seeing your site. The bearing replacement job is nothing a person with average mechanical skills can't do. Thanks for all your help"
Curtis F.
#2
"The Tony Tool system is superb. The installation process went forward without a problem. The tool worked flawlessly. The additional tools like the snap ring pliers and wire brush were nice touches. The DVD step by step instructions made reading instructions unnecessary. Although I’d worked on old style Maytags before, the Neptune was new to me. Even so, I completed the whole job including clean-up in less than 2 hours. All the parts needed were included; nothing was overlooked. I’d definitely do business with you guys again! Thanks."
Mark Baker
As you can see the Tony Tool is the solution for your 'Out of Control' Neptune bearings... The Tony Tool is available at www.neptunekits.com along with bulk bearing and 12002022 seal kits.
Don't forget to change your 12002535 door latch wax motor when you have it apart... All of the Neptune front loaders with timer knob run the risk of damaging R11 and Q6 on the machine control board. See www.neptunehelpsong.com for the cool video that explains the issue.
Until next time...
Wednesday, September 9, 2009
IRS Warning Emails and other computer hazzards...
Hi Neptuners,
You know better than to click on links in unexpected emails.... right?
If the IRS sends you an email don't click on the link... I recieved an email today and if you click on it you will be whisked away to a site that will undoubtedly feed your computer a virus or trojan.
And a reminder – it is best to avoid opening .zip files you receive in emails. A lot of times these will appear to come from UPS, DHL or FedEx with a note about a package that could not be delivered. The .zip file contains an executable attachment which will infect your PC. Companies will not send notices to customers in .zip files.
Finally, and most important (and thus, in bold and in red) – if you go to a website or click a link or open an attachment (or you’re just sitting there minding your own business) and a notice pops up on your screen that says something like “Warning! Your computer is infected” – it might be accompanied by an animation showing a scan and an increasing number of threats – DON’T CLICK ANYTHING. Clicking the graphic may download malware to your PC (even clicking the X that typically shuts down a window).
Things you can do are:
· Press and hold the ALT button and tap F4 to close all open windows until the computer shuts down. (You’ll hold the ALT button down the whole time.)
· If you know pressing your power button briefly shuts your PC off, you can do that instead. (Sometimes this puts a computer into hibernation mode – typically, in computers that came with XP or newer installed, its shuts them down.)
· If the network cable is easy to get to you could unplug it before the ALT-F4 step.
· If the ALT-F4 and power button items don’t work, press the power button in until the computer shuts down.
Good luck and keep your computer safe...
Keep your Maytag Neptune safe as well... See www.neptunehelp.com for Neptune information.
Until next time...
You know better than to click on links in unexpected emails.... right?
If the IRS sends you an email don't click on the link... I recieved an email today and if you click on it you will be whisked away to a site that will undoubtedly feed your computer a virus or trojan.
And a reminder – it is best to avoid opening .zip files you receive in emails. A lot of times these will appear to come from UPS, DHL or FedEx with a note about a package that could not be delivered. The .zip file contains an executable attachment which will infect your PC. Companies will not send notices to customers in .zip files.
Finally, and most important (and thus, in bold and in red) – if you go to a website or click a link or open an attachment (or you’re just sitting there minding your own business) and a notice pops up on your screen that says something like “Warning! Your computer is infected” – it might be accompanied by an animation showing a scan and an increasing number of threats – DON’T CLICK ANYTHING. Clicking the graphic may download malware to your PC (even clicking the X that typically shuts down a window).
Things you can do are:
· Press and hold the ALT button and tap F4 to close all open windows until the computer shuts down. (You’ll hold the ALT button down the whole time.)
· If you know pressing your power button briefly shuts your PC off, you can do that instead. (Sometimes this puts a computer into hibernation mode – typically, in computers that came with XP or newer installed, its shuts them down.)
· If the network cable is easy to get to you could unplug it before the ALT-F4 step.
· If the ALT-F4 and power button items don’t work, press the power button in until the computer shuts down.
Good luck and keep your computer safe...
Keep your Maytag Neptune safe as well... See www.neptunehelp.com for Neptune information.
Until next time...
Saturday, September 5, 2009
Maytag Neptune Bearing Service in Central Texas
Maytag Neptune Bearing Service in the Central Texas area - Call Steven @ 972-639-2520 because he can replace your Neptune front loader bearings using the Tony Tool and save you money.
To see Steven's listing goto http://www.neptunebearing.com/states/texas.htm
For more info see http://www.neptunebearing.com
To see Steven's listing goto http://www.neptunebearing.com/states/texas.htm
For more info see http://www.neptunebearing.com
Subscribe to:
Posts (Atom)