Here is another cool video type I can quickly create for you that has video in video technology to help set you apart from among the others...
I sneakily placed my Neptune Help Song video inside a tablet of all things..
Thank you,
Jeff Hartman
http://www.JHartmanDigital.com
Valuable Maytag Neptune front loader washer Information for you to help your machine last longer and provide better performance. You can repair your Neptune and save money... You will also discover some other cool information on here as well for folks who are doing side hustles and more. Check back often!
Tuesday, December 21, 2021
Saturday, December 18, 2021
Wax motor 12002535 spin video
Here is the famous Neptune door latch wax motor. Notice this one has the black colored actuator tip so it is a good one.
For more information on the wax motor failure check out www.NeptuneHelpSong.com
Jeff Hartman
The Neptune Man
Check out more videos on my www.JHartmanDigital.com page!
Tuesday, November 30, 2021
Neptune Bearing Replacement With Santa
Here is a custom video I created for my NeptuneBearing.com site. If you like it then check out my http://www.JHartmanDigital.com video production site where I can quickly create videos for you too!
If you need help with your Neptune front load washer's bearings then you're at the right place! Visit www.NeptunerBearing.com
Jeff Hartman
The Neptune Man
Sunday, November 21, 2021
Special Neptune Help Song Video I Created For You
Hi,
Here is another cool video type I can quickly create for you that has video in video technology to help set you apart from among the others...
I sneakily placed my Neptune Help Song video inside a PC monitor...
Thank you,
Jeff Hartman
The Neptune Man
For more video information visit www.JHartmanDigital.com
Thursday, November 18, 2021
Front Load Washer Bearing Video
If you need front load washer bearings then you naturally need to visit http://www.WasherBearings.com.
If you need custom videos created for your side hustle then run over to my http://www.JHartmanDigital.com for help!
Thank you,
Jeff Hartman
The Neptune Man
Wednesday, November 17, 2021
Saturday, November 13, 2021
Friday, June 11, 2021
I Don't Have a DVD Player... Help!
Hi,
It turns out that DVD players are not as common as they once were so I had to come up with a solution....
Jeff Hartman
The Neptune Man
Thursday, March 5, 2020
Maytag Neptune Bearing Tool Kit Rental Special For March 2020
Here is the March Neptune bearing tool kit rental special!
Thursday, November 14, 2019
How to prank your microwave oven
Check out my latest cool kit for your microwave! Visit my neptunebearing.com/misc.html page for more information.
Keep on the lookout for more cool kits from me...
Jeff Hartman
"The Neptune Man"
Saturday, July 20, 2019
My Air Conditioner Capacitor Finally Failed - Good Thing I had a Spare
Last year I blogged about having a spare capacitor for my outside condenser unit so I am ready in case the capacitor fails. Well... it finally failed after 19 years. Here is the original post https://neptunewasher.blogspot.com/2018/07/is-your-home-ac-not-working-heres-what.html
Jeff Hartman
"The Neptune Man"
P.S. If your washer sounds like the bearings are failing check out my www.washerbearings.com page for more information.
Friday, July 19, 2019
Maytag Neptune Bearing Tool Kit Rental Special For July, 2019
Goto www.neptunebearing.com for more information.
Jeff Hartman
"The Neptune Man"
For the latest federal tax refund information go to www.neptunebearing.com/tax.html
Thursday, June 20, 2019
How To Be a Stay At Home Mom Financially - Must See!
After watching the video... visit my www.neptunebearing.com/tax.html for more information on being a stay at home mom.
Stay tuned for more valuable information!
If your clothes washer sounds like a jet plane visit my www.washerbearings.com page for replacement bearing and seal kits.
Jeff Hartman
"The Neptune Man"
P.S. Being a stay at home mom might be easier than you think! Watch video...
Sunday, May 12, 2019
Nissan Altima P0430 Code Camshaft/Crankshaft Sensor
Own a Nissan Altima? Watch out for this failure...
Jeff Hartman
"The Neptune Man"
If your washer sounds like its crankshaft is going to explode then you need to visit my www.washerbearings.com site and replace your bearings and seal.
Jeff Hartman
"The Neptune Man"
If your washer sounds like its crankshaft is going to explode then you need to visit my www.washerbearings.com site and replace your bearings and seal.
Friday, April 19, 2019
My Blue Yeti is Back!
Saturday, March 16, 2019
You can download some cool ebooks from NASA
If you have some "free" time and want to make some new discoveries checkout the NASA ebook page. NASA has a large number of ebooks you can download that have lots for hi-res photos and more! Here's the link...
www.nasa.gov/connect/ebooks/index.html
Share this link with your kiddos so maybe it will spark there interest in science and math.
In addition, learn more about how federal income tax works on my www.neptunebearing.com/tax.html where you will discover some interesting new developments!
Jeff Hartman
"The Neptune man"
Saturday, January 26, 2019
Neptune Bearing Tool Kit Rental - Use Check or Money Order for Deposit
After numerous requests for clients that prefer not to use PayPal or credit cards... here you go!
Visit www.neptunebearing.com to find out more information about replacing your Maytag Neptune bearings and seal.
Thank you,
Jeff Hartman
"The Neptune Man"
Please leave a comment if this new option helps you...
Visit www.neptunebearing.com to find out more information about replacing your Maytag Neptune bearings and seal.
Thank you,
Jeff Hartman
"The Neptune Man"
Please leave a comment if this new option helps you...
Wednesday, January 16, 2019
Washer Bearing Replacement Tips
Here is a helpful video I created to help you replace your bearings. Visit my www.washerbearings.com for your bearing and seal kit for your washer.
Jeff Hartman
"The Neptune Man"
P.S. Visit my www.washerbearings.com for your bearing and seal kit for your washer.
P.S.S. Visit my www.neptunebearing.com/tax.html page for important information about income tax.
Jeff Hartman
"The Neptune Man"
P.S. Visit my www.washerbearings.com for your bearing and seal kit for your washer.
P.S.S. Visit my www.neptunebearing.com/tax.html page for important information about income tax.
Wednesday, November 21, 2018
Exploding toilet recall - Watch out!
Watch out for the exploding toilets because there are over 1 million of them out there!
If your washer sounds like it's going to explode you can replace your bearings and seal to make it quiet again. Visit www.washerbearings.com for more information.
Jeff Hartman
"The Neptune Man"
P.S. Don't forget that I offer www.F35Error.com and www.F01Error.com kits so you can repair your washer and dryer and save a bundle!
If your washer sounds like it's going to explode you can replace your bearings and seal to make it quiet again. Visit www.washerbearings.com for more information.
Jeff Hartman
"The Neptune Man"
P.S. Don't forget that I offer www.F35Error.com and www.F01Error.com kits so you can repair your washer and dryer and save a bundle!
Thursday, November 1, 2018
Maytag Neptune Bearing Tool Rental Special for November 2018
Click HERE for more information and to order!
Thank you,
Jeff Hartman
"The Neptune Man"
Check out my other money saving sites www.F35Error.com and www.F01Error.com for Whirlpool washer and dryers. Fix it yourself and save!
Saturday, October 6, 2018
Neptune MAH5500BWW Code OD
Neptune MAH5500BWW Code OD
Here is a series of emails between Ron and I regarding an issue he was having with his MAH5500BWW Neptune washer...
____________________________________________________________________________________
Jeff,
Trying to resolve
issue where control panel shows code OD after running through complete wash
cycle, but begins to leak water from bottom edge of door, and leaves water high
in drum unless reset to spin cycle. Earlier code of ND proved to be false after
removing pump and checking for any obstructions, then testing motor to ensure
function. Door seems to be locked, but if wash cycle stops at code OD, the door
can be opened with resulting flood of water from drum.
Is this caused by
faulty lock, sensor, or control board failure?
Thanks
Ron
____________________________________________________________________________________
Hi Ron,
Might be a couple of issues
happening...
It
sounds like the pump is working if it drains in a short amount of time.
I wonder why the water
level is too high. There could be a water level issue that is allowing the tub
to over fill.
For starters, I would
try removing all the connectors on the circuit boards and re-seating them which
can wipe the connector pins if there is any oxidation.
Have you located the
tech sheet which should be in the top console area? There will be some
diagnostics you can run to test the functions.
____________________________________________________________________________________
Hi Jeff,
Thanks for the prompt reply. I haven’t opened the top of unit
yet. Thought the issue was going to be the pump with the original code “ND”. Will
follow your advice below and then move onto tech sheet if still having problem.
Will let you know the results.
Ron
____________________________________________________________________________________
Hi Jeff,
Opened control housing and front of washer today. Pulled all
connectors off, then pushed back on to pins in each case. Found no corrosion or
debris on connectors or pins. All pin surfaces looked to be bright, not
oxidized. Found tech sheet and used it for next steps. Did a continuity check
on p3 & P8 as suggested on tech sheet; continuity showed good.
Placed the washer into diagnostic test mode to see if I could
get the door lock to do so and unlock. Pushing the button stated on the tech
sheet produced no response for lock or unlock or give a code, as I pushed the
door button inward and held it. However, once I fully assembled the front and
reattached the door I reset the diagnostic mode and was able to get the door
lock to engage and disengage with a satisfying click each time. The door seal
appears to be in perfect condition and I checked the small hose from the door
seal to drain and found no obstruction.
Next I followed the tech sheet instruction for reading the help
codes stored in memory. I’ve listed them below with the number of times they
were recorded. The only common denominator I see in the codes is “faulty
control board”. When I inspected the control board there was no sign of broken
solder, loose components, burned or charred connectors or components.
Codes in
Memory
Number of instances
01 No Drain
3
03 Faulty Door Latch
Sensor
9
05 Faulty Unbalance
Switch
6
05 Faulty Unbalance
Switch
1
17 Faulty Door
Switch
0
23 (can’t read my
note)
3
Finally, we previously tried to run a quick load to test the
door lock and seal, but had standing water in the drum with door pushed and
leaking at bottom. We opened door to reduce water level, then set washer to
spin to drain and retrieve load materials. When machine stopped, we pressed the
stop button and all control panel lights went dark. We were working nearby and
noticed that the washer powered up again and showed double-digit time in
display. We pressed stop button again and all lights went dark. Then
washer powered up again and we hit stop, then pulled power cord. I’m pretty
sure we caused some of the faulty door latch issues by opening the door and
trying to proceed to different cycles without cancelling fully and going back
to start.
Your thoughts on this problem would be greatly appreciated.
Thank you,
Ron
____________________________________________________________________________________
Hi
Ron,
First, the machine is
either over filling or not draining properly if water is up to the door. Have
you verified the discharge hose has good flow when pump should be running?
I would check to make
sure the water level pressure switch has the hose going from bottom of outer
tub to the pressure switch in the top console area. The hose may have a clog in
it and that could cause over filling.
____________________________________________________________________________________
Hi Jeff,
Checked discharge hose and all other small hoses at top of
machine, then double checked 90-degree hose from bottom of outer tub to pump
which has water level pressure switch mounted to top of plastic frame which has
pump and electronics attached, then twists into bottom pan of washer. All hoses
were clear of any debris or small sediment.
Attempted to run a load of light clothing with resulting water
level rising above inner tub and pressing door agape at bottom with water
flowing onto garage floor and into base drawer. Pressed door tightly against
seal and selected spin cycle. Pump evacuated all water from tub and flow from
discharge hose was steady as it went into plumbing at wall.
Since no clog is present, it seems that the water level pressure
switch may be the culprit. Have ordered part and hope to install Tuesday. Will
let you know results. I could not identify hose going from bottom of outer tub
to a pressure switch in the top console area on this model; MAH5500BWW. The
only switches/valves in top console area seem to be related to the flow of
water into the soap/bleach dispensers.
Ron
____________________________________________________________________________________
Hi Ron,
First, the machine is
either over filling or not draining properly if water is up to the door. Have
you verified the discharge hose has good flow when pump should be running?
I
would check to make sure the water level pressure switch has the hose going
from bottom of outer tub to the pressure switch in the top console area. The
hose may have a clog in it and that could cause over filling.
_____________________________________________________________________________________
Hi Jeff,
The water pressure level switch was the culprit. Replaced with
factory part, ran test load without any problem. Repair complete.
Thank you for your advice and blog.
Sincerely,
Ron
_____________________________________________________________________________________
I hope this post was helpful!
Jeff Hartman
"The Neptune Man"
Tuesday, July 17, 2018
Is Your Home AC Not Working - Here's What You Can Check
Wow, it is the hottest day for the year and you notice that your AC is only blowing warm air. What do you do?
I recommend that you have a voltmeter and spare capacitor ready for just this moment...
Just remember to be safe when working with appliances!
Jeff Hartman
"The Neptune Man"
www.washerbearings.com
www.F35Error.com
www.F01Error.com
I recommend that you have a voltmeter and spare capacitor ready for just this moment...
Just remember to be safe when working with appliances!
Jeff Hartman
"The Neptune Man"
www.washerbearings.com
www.F35Error.com
www.F01Error.com
Saturday, March 24, 2018
Washer Belt Installation Trick
When installing a new washer belt you might need this trick to save time and effort...
I hope this was helpful!
Jeff Hartman
"The Neptune Man"
www.washerbearings.com
www.f35error.com
www.f01error.com
I hope this was helpful!
Jeff Hartman
"The Neptune Man"
www.washerbearings.com
www.f35error.com
www.f01error.com
MGDE300VW1 Dryer F01 Error Code Repair kit
Hello,
A client sent an email asking about their Maytag MGDE300VW1 dryer that is displaying the F01 Error code. He wanted to know if the www.F01Error.com repair kit would help.
After years of operation the relay on the control board starts to wear out and it will get to the point where the relay contacts will get so worn the dryer will have trouble starting and will set the F01 error code. It is time to replace the relay which is what mostly causes the F01 error and it is in the kit. Don't replace your expensive control board... Simply replace the relay instead!
When I looked up his MGDE300VW1 dryer parts list it turns out that he has the W10174745 control board (# 52). So the answer is... Yes! The F01 Error kit will help him.
Thank you,
Jeff Hartman
"The Neptune Man"
P.S. Visit my www.washerbearings.com if your washer sounds like a jet taking off.
P.S.S. Is your washer getting the F35 error code? Visit my www.F35Error.com for help!
A client sent an email asking about their Maytag MGDE300VW1 dryer that is displaying the F01 Error code. He wanted to know if the www.F01Error.com repair kit would help.
After years of operation the relay on the control board starts to wear out and it will get to the point where the relay contacts will get so worn the dryer will have trouble starting and will set the F01 error code. It is time to replace the relay which is what mostly causes the F01 error and it is in the kit. Don't replace your expensive control board... Simply replace the relay instead!
When I looked up his MGDE300VW1 dryer parts list it turns out that he has the W10174745 control board (# 52). So the answer is... Yes! The F01 Error kit will help him.
Thank you,
Jeff Hartman
"The Neptune Man"
P.S. Visit my www.washerbearings.com if your washer sounds like a jet taking off.
P.S.S. Is your washer getting the F35 error code? Visit my www.F35Error.com for help!
Wednesday, January 3, 2018
Ohio Tax Amnesty For Those Individuals and Businesses that Owe
If you owe Ohio taxes then this video is for you!
Jeff Hartman
"The Neptune Man"
www.washerbearings.com for washers that sound like a jet plane taking off in the spin cycle...
Jeff Hartman
"The Neptune Man"
www.washerbearings.com for washers that sound like a jet plane taking off in the spin cycle...
Saturday, December 23, 2017
F35 Error Code on Washer - How To Fix
Here is a helpful video on what to do if you're getting the F35 and SUD error on your washer.
After video visit www.F35Error.com for more information or to order a F35 Error kit.
Thank you,
Jeff Hartman
"The Neptune Man"
P.S. You can also find information on the F01 Error code your dryer can display by visiting www.F01Error.com!
After video visit www.F35Error.com for more information or to order a F35 Error kit.
Thank you,
Jeff Hartman
"The Neptune Man"
P.S. You can also find information on the F01 Error code your dryer can display by visiting www.F01Error.com!
Thursday, November 23, 2017
Tuesday, October 17, 2017
Whirlpool Washer F35 Error code - Repair Kit Feedback
Have you repaired your Whirlpool built washer with the www.F35Error.com kit? Remember, Whirlpool manufactures a number of different brands such as Whirlpool Duets, Kenmore Elites and Maytag washers.
Please leave a comment on your washer F35 repair experience and let me know the following:
1. If you first tried replacing your APS (analog pressure sensor) and if so, how long did it last before you experienced the F35 error code again?
2. Did you perform the F35 Error kit or the APS repair kit, or both?
3. How long did it take to perform the repair?
4. Did you receive a quote on what the repair would have cost?
Thank you,
Jeff Hartman
"The Neptune Man"
P.S. Visit my other money saving sites such as www.F01Error.com and www.washerbearings.com for when your washer sounds like a jet plane taking off in the spin cycle.
Friday, October 6, 2017
Whirlpool Dryer F01 Error code - Repair Kit Feedback
Have you repaired your Whirlpool built dryer with the www.F01Error.com kit? Remember Whirlpool manufactures a number of different brands such as Kenmore Elite and Maytag dryers.
Please leave a comment on your dryer F01 repair experience and let me know the following:
1. If you first tried soldering the melted relay terminal and if so, how long did it last before you experienced the F01 error code again.
2. How long did it take to perform the repair.
3. Did you receive a quote on what the repair would have cost.
4. Send me a photo of you working on your F01 repair.
Thank you,
Jeff Hartman
"The Neptune Man"
P.S. Visit my other money saving sites such as www.F35Error.com and www.washerbearings.com for when your washer sounds like a jet plane taking off in the spin cycle.
Monday, October 2, 2017
Blooper Reel of SpaceX' Booster Landings before they landed it
Here is a blooper reel that SpaceX released of some failures when attempting to land the Falcon 9 booster. The idea that reusing the boosters will reduce the cost of future launch missions. It's a good thing it did not take as many landing attempts as Thomas Edison did when inventing the light bulb!
I have not failed. I've just found 10,000 ways that won't work... - Thomas Edison
Jeff Hartman
"The Neptune Man"
P.S. If your washer sounds like a rocket booster landing when in the high speed spin cycle then visit www.washerbearings.com for help!
Sunday, October 1, 2017
WFW94HEAW2 – Another Whirlpool Washer Not To Buy
I get this question all the time. I decided to turn it around so I can
tell you which washers I recommend you don’t buy based on my experiences and
save you some frustration and money...
Whether you’re shopping for a new or pre-owned washer online or picking one up off the curb you need to know which models you can easily replace the bearings and seal. Otherwise, it will be too expensive to repair. Visit the site above to see all of the models that we offer bearing and seal kits for and you will be good.
Today, we are looking at a Whirlpool WFW94HEAW2 front load washer that when the bearings fail you will not be able to cost effectively replace the bearings and seal because the two tub halves are glued together. For that reason I recommend that you don't buy them. Note: The WFW94HEAC2, WFW94HEAC0 and WFW94HEAW0 is the same washer except for the color, etc.
Have you
been bitten by a bearing failure in the WFW94HEAW2 front load washer? Let me
know in the comments.
So far the Whirlpool washer models to avoid are:
WFW70HEBW0
WFW72HEDW0
WFW87HEDW0
WFW95HEXW2
So far the Whirlpool washer models to avoid are:
WFW70HEBW0
WFW72HEDW0
WFW87HEDW0
WFW95HEXW2
WFW94HEAW0
WFW94HEAW2
WFW94HEAW2
WFW94HEAC0
WFW94HEAC2
Maytag washers to avoid are:
MHW3505FW0
I will add to the list as I discover more model numbers you don't want to own due to the fact you cannot change your bearings economically...
Thank you,
Jeff Hartman
“The Neptune Man”
Tuesday, September 19, 2017
Warning - Washer Dryer Hose Y Adapter Can Flood Your House
www.washerbearings.com - Watch this important video to protect your house from flooding.
Leave comment if you have experienced this failure or know someone who has...
Thank you,
.
Jeff Hartman
"The Neptune Man"
P.S. If you're washer is giving you the F35 / SUD Error code visit my www.F35Error.com page for help!
Friday, September 15, 2017
Maytag MHW3505FW0 - Which Maytag Washer Not To Buy
www.washerbearings.com - I get this question all the time. I decided to turn it around so I can tell you which washers I recommend you don’t buy based on my experiences and save you some frustration and money...
Whether you’re shopping for a new or pre-owned washer online or picking one up off the curb you need to know which models you can easily replace the bearings and seal. Otherwise, it will be too expensive to repair. Visit the site above to see all of the models that we offer bearing and seal kits for and you will be good.
Today, we are looking at a Maytag MHW3505FW0 front load washer that when the bearings fail you will not be able to cost effectively replace the bearings and seal because the two tub halves are glued together. For that reason I recommend that you don't buy them.
Check out the video and watch for more washers that you should avoid.
Have you been bitten by a bearing failure in the WFW70HEBW0 front load washer? Let me know in the comments.
So far the Whirlpool washer models to avoid are:
WFW70HEBW0
WFW72HEDW0
WFW87HEDW0
WFW95HEXW2
Maytag washers to avoid are:
MHW3505FW0
I will add to the list as I discover more model numbers you don't want to own due to the fact you cannot change your bearings economically...
Thank you,
Jeff Hartman
“The Neptune Man”
P.S. If you're washer is giving you the F35 / SUD Error code visit my www.F35Error.com page for help!
Thursday, September 14, 2017
Another Washer You Do Not Want To Buy - WFW70HEBW0
www.washerbearings.com - I get this question all the time. I decided to turn it around so I can tell you which washers I recommend you don’t buy based on my experiences and save you some frustration and money...
Whether you’re shopping for a new or pre-owned washer online or picking one up off the curb you need to know which models you can easily replace the bearings and seal. Otherwise, it will be too expensive to repair. Visit the site above to see all of the models that we offer bearing and seal kits for and you will be good.
Today, we are looking at a Whirlpool WFW70HEBW0 front load washer that when the bearings fail you will not be able to cost effectively replace the bearings and seal because the two tub halves are glued together. For that reason I recommend that you don't buy them.
Watch the video and subscribe for more washers that you should avoid.
Have you been bitten by a bearing failure in the WFW70HEBW0 front load washer? Let me know in the comments.
So far the Whirlpool washer models to avoid are:
WFW70HEBW0
WFW72HEDW0
WFW87HEDW0
WFW95HEXW2
I will add to the list as I discover new model numbers you don't want to own due to the fact you cannot change your bearings economically...
Thank you,
Jeff Hartman
“The Neptune Man”
P.S. If you're washer is giving you the F35 / SUD Error code visit my www.F35Error.com page for help!
Tuesday, September 12, 2017
Another Washer You Do Not Want To Buy - WFW87HEDW0
www.washerbearings.com - I get this question all the time. I decided to turn it around so I can tell you which washers I recommend you don’t buy based on my experiences and save you some frustration and money...
Whether you’re shopping for a new or pre-owned washer online or picking one up off the curb you need to know which models you can easily replace the bearings and seal. Otherwise, it will be too expensive to repair. Visit the site above to see all of the models that we offer bearing and seal kits for and you will be good.
Today, we are looking at a Whirlpool WFW87HEDW0 front load washer that when the bearings fail you will not be able to cost effectively replace the bearings and seal because the two tub halves are glued together. For that reason I recommend that you don't buy them.
Check out the video and be on the lookout for more washers that you should avoid.
Have you been bitten by a bearing failure in the WFW87HEDW0 front load washer? Let me know in the comments.
So far the models to avoid are:
WFW72HEDW0
WFW87HEDW0
I will add to the list as I discover their model numbers...
Thank you,
Jeff Hartman
“The Neptune Man”
Which washer and dryer should I buy - Here's one you don't want to buy
www.washerbearings.com - I get this question all the time. I decided to turn it around so I can tell you which washers I recommend you don’t buy based on my experiences and save you some frustration and money...
Whether you’re shopping for a pre-owned washer online or picking one up off the curb you need to know which models you can easily replace the bearings and seal. Otherwise, it will be too expensive to repair. Visit the site above to see all of the models that we offer bearing and seal kits for and you will be good.
Today, we are looking at a Whirlpool WFW72HEDW0 front load washer where the bearings failed after three short years of use. David, a technician in Florida called me and said that he could not replace the bearings and seal because the tub halves were glued together and you have to purchase the whole tub assembly for around $700!
Checkout the video and watch for more washers that you should avoid.
Have you been bitten by a bearing failure in the WFW72HEDW0 front load washer? Let me know in the comments.
Thank you,
Jeff Hartman
“The Neptune Man”
P.S. If you're washer is giving you the F35 / SUD Error code visit my www.F35Error.com page for help!
Monday, September 11, 2017
Tony Tool Review - Maytag Neptune Bearing Replacement Tool
www.neptunekits.com - Whether you're an appliance technician, laundromat owner or handyman wanting to help people make their washers last longer you should invest in a Tony Tool kit which was naturally designed for the Maytag Neptune front load washers with the solid door panel (no window).
You know that having the right tool for the job is paramount when performing the more difficult tasks so why would you attempt replacing Neptune bearings without a tool?
I've used the Tony Tools since 2009 and can attest to how durable these tools are!
In addition, you can order bulk Neptune bearings and bulk Neptune bearing and 12002022 seal kits at a discount and save even more by visiting the www.neptunekits.com page.
Let me know if you've used a Tony Tool in the comments below and don't forget to subscribe!
Jeff Hartman
"The Neptune Man"
Saturday, September 9, 2017
Maytag Neptune No Spin Issue Video - What to do
Hi Neptuner,
I just finished up a new video for explaining what to do when your Maytag Neptune Front load washer will not lock the door and spin the clothes and the R11 resistor on the machine control board is burnt...
Until next time...
Jeff Hartman
"The Neptune Man"
www.washerbearings.com
I just finished up a new video for explaining what to do when your Maytag Neptune Front load washer will not lock the door and spin the clothes and the R11 resistor on the machine control board is burnt...
Until next time...
Jeff Hartman
"The Neptune Man"
www.washerbearings.com
Neptune Bearing Tool Kit Upgrade - We are Jamming!
www.neptunebearing.com – Due to Neptuner feedback a jam nut will be included with each Neptune bearing tool kit in case the round nut threads itself off the threaded rod. This will lock the round nut to the shaft. In most cases the Neptune bearing tool works flawlessly but we have had a recent issue so we are nipping it in the bud.
As always, I welcome feedback so I can keep improving the Neptune bearing replacement process.
Thank you,
Jeff Hartman
“The Neptune Man”
P.S. If your washer is giving you the F35 SUD error then visit my www.F35Error.com page for a solution!
Monday, September 4, 2017
Top Thrill Dragster Ride Pushes How Much Horsepower?
Here is a physics Question for you... How much horse power does it take to accelerate a 7 ton train from zero to 120 mph in less than 4 seconds?
I recently visited Cedar Point in Sandusky Ohio and rode the Top Thrill Dragster and what a rush it provides!
If your washing machine sounds like the Top Thrill Dragster taking off then it is time to replace your bearings! Visit my www.washerbearings.com for answers.
Thank you and enjoy!
Jeff Hartman
"The Neptune Man"
Sunday, April 2, 2017
Dryer F01 Error Fix - Repair Kit
This video will help you if your dryer is experiencing the F01 Error code. I created the www.F35Error.com repair kit so I naturally created the www.F01Error.com kit for you. I start with a history of repair kits I've created to save homeowners a ton of money. Skip to 5:15 for the F01 Error kit intro...
Let me know if this video helped you in the comments below!
Thank you,
Jeff Hartman
"The Neptune Man"
P.S. Visit my www.washerbearings.com site if your washer is sounding like a jet taking off to discover how to replace your bearings and save a bundle.
Let me know if this video helped you in the comments below!
Thank you,
Jeff Hartman
"The Neptune Man"
P.S. Visit my www.washerbearings.com site if your washer is sounding like a jet taking off to discover how to replace your bearings and save a bundle.
Subscribe to:
Posts (Atom)